Bug#279066: installation-reports
Package: installation-reports
Debian-installer-version: sarge-i386-netinst.iso pre-rc2
uname -a: Linux elcflo 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux
Date: 2004-07-24
Method: netinst CD image, with Debian base
Machine:
Processor: Celeron 400MHz
Memory: 496Mo
Root Device: IDE hda5
Root Size/partition table:
elcflo:/home/phil# fdisk -l /dev/hda
Disk /dev/hda: 15.3 GB, 15377080320 bytes
255 heads, 63 sectors/track, 1869 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1231 9887976 83 Linux
/dev/hda2 1232 1869 5124735 5 Extended
/dev/hda5 1232 1852 4988151 83 Linux
/dev/hda6 1853 1869 136521 82 Linux swap
elcflo:/home/phil# fdisk -l /dev/hdb
Disk /dev/hdb: 20.5 GB, 20520493056 bytes
255 heads, 63 sectors/track, 2494 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 61 489951 83 Linux
/dev/hdb2 62 669 4883760 83 Linux
/dev/hdb3 670 1277 4883760 5 Extended
/dev/hdb4 1278 2494 9775552+ 83 Linux
/dev/hdb5 670 791 979933+ 82 Linux swap
/dev/hdb6 792 1277 3903763+ 83 Linux
elcflo:/home/phil# mount
/dev/hda5 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/hda1 on /home type ext2 (rw)
/dev/hdb2 on /mnt/hdb2 type ext3 (rw)
/dev/hdb4 on /mnt/hdb4 type ext2 (rw)
/dev/hdb6 on /mnt/hdb6 type ext2 (rw)
usbfs on /proc/bus/usb type usbfs (rw)
Output of lspci and lspci -n:
elcflo:/home/phil# lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
0000:00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
elcflo:/home/phil# lspci -n
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:09.0 0200: 10ec:8029
0000:00:0d.0 0401: 1274:1371 (rev 08)
0000:01:00.0 0300: 1002:4742 (rev 5c)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [ ]
Reboot: [O]
Comments/Problems:
No problems, all works really fine!
--
Philippe Brochard <hocwp_NO@SPAM_free.fr>
http://hocwp.free.fr
-=-= http://www.gnu.org/home.fr.html =-=-
Reply to: