Bug#278259: (no subject)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image>
uname -a: <The result of running uname -a on a shell prompt>
Date: <Date and time of the install>
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
Machine: HP d530 SFF
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 512Mb
Root Device: IDE
Root Size/partition table:
Device Boot Start End Blocks Mounted
/dev/hda1 1 18 136048+ /boot
/dev/hda2 * 19 118 756000 /
/dev/hda3 119 218 756000 swap
/dev/hda4 219 5169 37429560 Extended
/dev/hda5 219 748 4006768+ /usr
/dev/hda6 749 1278 4006768+ /var
/dev/hda7 1279 3861 19527448+ /usr/local
/dev/hda8 3862 5169 9888448+ /home
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:05:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet (rev 03)
0000:00:00.0 0600: 8086:2570 (rev 02)
0000:00:02.0 0300: 8086:2572 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:05:02.0 0200: 14e4:1696 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
A refreshingly clean install, given that I've tried before on HP ProLiant
servers and run in to APIC problems. The partitioning is a bit of a pain
though - shortcuts on the menu would be nice.
Reply to: