Bug#277904: Debian Installation Report Template
Package: installation-reports
Debian-installer-version: 22-10-2004
uname -a: Linux debian 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i686 GNU/Linux
Date: 22-10-2004 16.37.57
Method: netinst CD image
Machine: Acer Ferrari 3200
Processor: mobile AMD Athlon 64 2800+
Memory: 512
Root Device: IDE /dev/hda3
Root Size/partition table: size=13.8 /
Output of lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
0000:00:07.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
0000:00:07.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller
0000:00:09.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
0000:00:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
Output of lspci -n
0000:00:00.0 0600: 1106:3188 (rev 01)
0000:00:01.0 0604: 1106:b188
0000:00:07.0 0607: 104c:ac44 (rev 02)
0000:00:07.1 0c00: 104c:8029
0000:00:09.0 0200: 168c:0013 (rev 01)
0000:00:0b.0 0200: 14e4:169c (rev 03)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:11.6 0780: 1106:3068 (rev 80)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 1002:4e50
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Problems
First it did not boot on any image i tried.
Then i tried several boot parameters whitch one workt [ Disable framebuffer ]
Also i edit my XF86Config -4 file and now running 1400x1050 24bits
It goes standard on 800x600
I do not no of editing the XF86config file is right but it was the only way to get this resolution.
With the installer for the graphics was the only option to set the vertical/horizontal refresh rate,then you get an automatic resolution for 800x600.
I think i did somthing wrong but ther was no alternativ.
Comments
info: /bin/report-hw: discover: yenta_socket;;;Texas Instruments;PCI4510 PC card Cardbus Controller;
info: /bin/report-hw: discover: via-ircc;;;VIA Technologies, Inc.;VT8235 ISA Bridge;
info: /bin/report-hw: discover: ;;;Unknown;MATSHITADVD-RAM UJ-825S;/dev/hdc
info: /bin/report-hw: discover: tg3;;;BROADCOM Corporation;NetXtreme BCM5788 Gigabit Ethernet;
info: /bin/report-hw: discover: via82cxxx;;;VIA Technologies, Inc.;VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE;
info: /bin/report-hw: discover: ide-scsi;;;Linux;IDE-SCSI emulation layer;
ininfo: /bin/report-hw: discover: yenta_socket;;;Texas Instruments;PCI4510 PC card Cardbus Controller;fo: /bin/report-hw: discover: usb-uhci;;;VIA Technologies, Inc.;VT82xxxxx UHCI USB 1.1 Controller;
info: /bin/report-hw: discover: usb-uhci;;;VIA Technologies, Inc.;VT82xxxxx UHCI USB 1.1 Controller;
info: /bin/report-hw: discover: usb-uhci;;;VIA Technologies, Inc.;VT82xxxxx UHCI USB 1.1 Controller;
info: /bin/report-hw: discover: ehci-hcd;;;VIA Technologies, Inc.;USB 2.0;
info: /bin/report-hw: discover: ;;;Unknown;TOSHIBA MK8025GAS;/dev/hda
info: /bin/report-hw: discover: ;;;Generic;Flash R/W;/dev/sda
error: /bin/report-hw: Unable to find lspci.
My atheros mini-pci module is not reconized
Also is my graphic card an ati mobility radeon 9700
btw this installer is an enormus step forwards (very custumer frendly)
regards
wim
Netherlands
Reply to: