Bug#277102: (forw) RE: Bug#277102: Installation report

[Christian Perrier <bubulle@debian.org>]

This is the additionnal information supplied by the bug reporter.

All this seems to be quite common stuff, so it's still strange that
the CD reader was not detected.

Walter, do you by chance have a dmesg output from a working installed
system?

If so, please post it to 277102@bugs.debian.org

----- Forwarded message from "Holladay, Walter" <Walter_Holladay@intuit.com> -----

From: "Holladay, Walter" <Walter_Holladay@intuit.com>
To: Christian Perrier <bubulle@debian.org>
Subject: RE: Bug#277102: Installation report
Date: Tue, 19 Oct 2004 09:21:30 -0700
X-Mailer: Internet Mail Service (5.5.2657.72)

Output from lspci -n

00:00.0 Class 0600: 8086:7180 (rev 03)
00:01.0 Class 0604: 8086:7181 (rev 03)
00:0d.0 Class 0300: 1002:4752 (rev 27)
00:0e.0 Class 0200: 10ec:8139 (rev 10)
00:0f.0 Class 0200: 10b7:9055 (rev 30)
00:14.0 Class 0601: 8086:7110 (rev 02)
00:14.1 Class 0101: 8086:7111 (rev 01)
00:14.2 Class 0c03: 8086:7112 (rev 01)
00:14.3 Class 0680: 8086:7113 (rev 02)

Output from lspci -v

00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
        Flags: bus master, medium devsel, latency 64
        Memory at 44000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
(prog-if 00 [Normal decode])
        Flags: 66Mhz, medium devsel
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64

00:0d.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc: Unknown device 8008
        Flags: bus master, stepping, medium devsel, latency 66, IRQ 11
        Memory at 40000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at 1000 [size=256]
        Memory at 41000000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: <available only to root>

00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev
10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 66, IRQ 11
        I/O ports at 1400 [size=256]
        Memory at 41100000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

00:0f.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 30)
        Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
        Flags: bus master, medium devsel, latency 64, IRQ 11
        I/O ports at 1800 [size=128]
        Memory at 41200000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: <available only to root>

00:14.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
        Flags: bus master, medium devsel, latency 0

00:14.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
        Flags: bus master, medium devsel, latency 64
        I/O ports at 20a0 [size=16]

00:14.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 11
        I/O ports at 2080 [size=32]

00:14.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
        Flags: medium devsel, IRQ 9


-----Original Message-----
From: Christian Perrier [mailto:bubulle@debian.org] 
Sent: Monday, October 18, 2004 10:43 PM
To: Holladay, Walter; 277102@bugs.debian.org
Cc: submit@bugs.debian.org
Subject: Re: Bug#277102: Installation report


>    At some point the install says it is unable to mount the CD ROM drive.
>    I am unable to complete the installation because of this problem.

We need some more information, otherwise the report will be useless.

What kind of CD reader is this?

Can you post the output of "lspci -n" and "lspci -v"?

(this may be made by booting an existing Linux install...or a Knoppix CD)

-- 



----- End forwarded message -----

--