Bug#276786: INSTALL REPORT
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 09/27/04
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/powerpc/pre-rc2/sarge-powerpc-netinst.iso
uname -a: Linux DebianPPC 2.6.8-powerpc #1 Tue Sep 14 00:15:52 CEST 2004
ppc GNU/Linux
Date: 10/16/04
Method: NetInst CD, downloaded using http.
Machine: iBook2
Processor:800Mhz G3 PowerPC
Memory:256MB
Root Device: IDE, hda4
Root Size/partition table: swap=256M /=10G /macosx=15G
Output of lspci and lspci -n:
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500]
0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea PCI
0001:01:17.0 ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O
0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB
0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo/Pangea USB
0002:02:0b.0 Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI
0002:02:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth/Pangea
FireWire
0002:02:0f.0 ffff: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM)
(rev ff)
0000:00:0b.0 0600: 106b:0027
0000:00:10.0 0300: 1002:4c57
0001:01:0b.0 0600: 106b:0028
0001:01:17.0 ff00: 106b:0025
0001:01:18.0 0c03: 106b:0026
0001:01:19.0 0c03: 106b:0026
0002:02:0b.0 0600: 106b:0029
0002:02:0e.0 0c00: 106b:0030
0002:02:0f.0 ffff: 106b:0024 (rev ff)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems: The network config said that my Airport card was on
eth1, when in reality it is on eth0. The interesting
part is that it still worked during the installation.
However, once I rebooted it did not work and I had
rewrite /etc/network/interfaces. This was easy for me,
however I do not think that a new Linux user would
be overjoyed at the site of the command line with no working
internet connections. Other than that I am
proud to say that everything went perfectly. Good job guys!
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
I downloaded the .iso file from an http mirror and then burnt it to a
CD-R usingDisk Utility from Apple. I then rebooted, held down the C key
and everything went perfectly except for the above mentioned. I did not
have to modify any config files by hand to get X-Free86 working and I
have hardware video accelaration.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: