[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#276659: Package: installation-reports



Package: installation-reports

Debian-installer-version: pre-rc2
uname -a: Linux stacy.modallport.com.br 2.6.8-1-i386 #1 SMP Qui Out 14
10:59:28 BRT 2004 i686 GNU/Linux
Date: Qui Out 14 09:00:00 BRT 2004
Method: I'm installed from Cd image sarge-netinst pre-rc2, and I was
installed only the base system of the CD.

Machine: Personal Computer (generic) 
Processor: Pentium IV 1700MHz 256KB cache
Memory: 512MB PC133
Root Device: IDE - /dev/hda3
Root Size/partition table: 5GB

Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
(rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge
(rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
02:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M
AGP 2x (rev 64)
02:03.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev
74)
02:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 30)
02:05.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev
6c)

lspci -n
00:00.0 Class 0600: 8086:1a30 (rev 03)
00:01.0 Class 0604: 8086:1a31 (rev 03)
00:1e.0 Class 0604: 8086:244e (rev 12)
00:1f.0 Class 0601: 8086:2440 (rev 12)
00:1f.1 Class 0101: 8086:244b (rev 12)
00:1f.3 Class 0c05: 8086:2443 (rev 12)
02:00.0 Class 0300: 1002:4c4d (rev 64)
02:03.0 Class 0200: 10b7:9200 (rev 74)
02:04.0 Class 0200: 10b7:9055 (rev 30)
02:05.0 Class 0200: 10b7:9200 (rev 6c)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [0]
Configure network HW:   [0]
Config network:         [0]
Detect CD:              [0]
Load installer modules: [0]
Detect hard drives:     [0]
Partition hard drives:  [0]
Create file systems:    [0]
Mount partitions:       [0]
Install base system:    [0]
Install boot loader:    [0]
Reboot:                 [0]

Comments/Problems:
After reboot, the system execute the base-config with sucess, but on screen
of choose the packages to install,
I,m select, "install packages manually" and the base-config show me a screen
of error saying 
"the selected packages not found" and in the /var/log/messages appear this
line:
"Kernel: reiserFS: hda6: warning: vs-8115: get_num_ver: not directory item"
hda6 is my /tmp




Reply to: