Package: installation-reports
INSTALL REPORT
Debian-installer-version: pre-rc2
uname -a: Linux brutus 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux
Date: Sat Oct 9 11:37:42 EST 2004
Method: netinst CD
Machine: noname clone
Processor: Pentium IV
Memory: 256M
Root Device: IDE
Root Size/partition table:
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 7295 58597056 7 HPFS/NTFS
/dev/hda2 7296 7326 249007+ 83 Linux
/dev/hda3 7327 7388 498015 83 Linux
/dev/hda4 7389 14593 57874162+ 8e Linux LVM
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/mapper/base-root
ext3 491364 54080 411070 12% /
tmpfs tmpfs 128524 0 128524 0% /dev/shm
/dev/mapper/base-home
ext3 982728 8243 922057 1% /home
/dev/mapper/base-tmp
ext3 982728 8240 922060 1% /tmp
/dev/mapper/base-usr
ext3 4128448 276440 3642296 8% /usr
/dev/mapper/base-var
ext3 1965459 250231 1610371 14% /var
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 12)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
0000:03:00.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
0000:03:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:03:02.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
0000:00:00.0 0600: 8086:1a30 (rev 03)
0000:00:01.0 0604: 8086:1a31 (rev 03)
0000:00:1e.0 0604: 8086:244e (rev 12)
0000:00:1f.0 0601: 8086:2440 (rev 12)
0000:00:1f.1 0101: 8086:244b (rev 12)
0000:00:1f.2 0c03: 8086:2442 (rev 12)
0000:00:1f.3 0c05: 8086:2443 (rev 12)
0000:00:1f.4 0c03: 8086:2444 (rev 12)
0000:01:00.0 0300: 10de:0110 (rev b2)
0000:03:00.0 0401: 1274:5000 (rev 01)
0000:03:01.0 0200: 8086:1229 (rev 08)
0000:03:02.0 0c00: 104c:8019
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
It's good that I can now have the whole system on LVM. (Must try putting swap
on there as well just for the heck of it).
No problems, no aggravations, it was all good.
Attachment:
signature.asc
Description: Digital signature