Bug#275222: Successful installation
Package: installation-reports
Debian-installer-version: Debian-Installer pre-rc2,
downloaded on Oct. 5 from www.nl.debian.org
uname -a: Linux dozer 2.6.8-1-686 #1 Tue Sep 14 00:22:58 EDT 2004 i686 GNU/Linux
Date: 5 Oct 2004
Method: Netinstall over http, booted from CD. Fixed RAID and LVM before starting partitioner.
Machine: Clone, self-built
Processor: Intel PII (Deschutes), 400MHz
Memory: 384M
Root Device: IDE (RAID), hda = "Maxtor 52049U4", hdc = "WDC WD200BB-60CVB0"
Root Size/partition table:
Disk /dev/hda: 20.4 GB, 20490559488 bytes
16 heads, 63 sectors/track, 39703 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 98 49360+ fd Linux raid autodetect
/dev/hda2 99 1068 488880 fd Linux raid autodetect
/dev/hda3 1069 38792 19012896 fd Linux raid autodetect
/dev/hda4 38793 39703 459144 83 Linux
Disk /dev/hdc: 20.0 GB, 20020396032 bytes
16 heads, 63 sectors/track, 38792 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 98 49360+ fd Linux raid autodetect
/dev/hdc2 99 1068 488880 fd Linux raid autodetect
/dev/hdc3 1069 38792 19012896 fd Linux raid autodetect
Output of `cat /proc/mdstat`:
Personalities : [raid1]
md0 : active raid1 hda1[0] hdc1[1]
49280 blocks [2/2] [UU]
md2 : active raid1 hda3[0] hdc3[1]
19012800 blocks [2/2] [UU]
md1 : active raid1 hda2[0] hdc2[1]
488768 blocks [2/2] [UU]
unused devices: <none>
Output of `vgdisplay`:
--- Volume group ---
VG Name vg00
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 3
Max PV 0
Cur PV 1
Act PV 1
VG Size 18.13 GB
PE Size 1.00 MB
Total PE 18566
Alloc PE / Size 1000 / 1000.00 MB
Free PE / Size 17566 / 17.15 GB
VG UUID GKwzyd-r6Yv-0uLq-ZP3U-EmY4-K4wE-c8Bgbx
Output of `lvscan`:
ACTIVE '/dev/vg00/root' [500.00 MB] inherit
ACTIVE '/dev/vg00/tmp' [250.00 MB] inherit
ACTIVE '/dev/vg00/var' [250.00 MB] inherit
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
0000:00:0b.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01)
0000:00:00.0 0600: 8086:7190 (rev 02)
0000:00:01.0 0604: 8086:7191 (rev 02)
0000:00:04.0 0601: 8086:7110 (rev 02)
0000:00:04.1 0101: 8086:7111 (rev 01)
0000:00:04.2 0c03: 8086:7112 (rev 01)
0000:00:04.3 0680: 8086:7113 (rev 02)
0000:00:09.0 0200: 10b7:9055 (rev 30)
0000:00:0b.0 0100: 1000:000c (rev 01)
0000:01:00.0 0300: 102b:0521 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Nice, very nice. Finally a Debian that installs with RAID and LVM!
Couldn't find a way to make installer create RAID arrays and use one of them
for LVM, so I did it myself. When I got to the point where I had to partition
the disks, I fired up a terminal, created the RAID arrays, ran pvcreate,
vgcreate and lvcreate and returned to the installer. The partitioner happily
detected the RAID arrays and logical volumes I had just made, and everything
installed just fine from there.
At boot time, however, I get these messages (I installed 2 different machines
and got the same messages while booting):
devfs_mk_dev: could not append to parent for /disc
devfs_mk_dir: invalid argument.<4>devfs_mk_dev: could not append to parent for /disc
devfs_mk_dir: invalid argument.<4>devfs_mk_dev: could not append to parent for /disc
devfs_mk_dir: invalid argument.<4>devfs_mk_dev: could not append to parent for /disc
devfs_mk_dir: invalid argument.<4>devfs_mk_dev: could not append to parent for /disc
I get 129 of these ones... After that, I get these:
VFS: Can't find ext3 filesystem on dev dm-0.
VFS: Can't find ext2 filesystem on dev dm-0.
VFS: Can't find ext3 filesystem on dev dm-0.
VFS: Can't find ext2 filesystem on dev dm-0.
...which is correct, because I use JFS on my logical volumes (I don't like
the idea of unmounting an active volume after a vgextend). Finally there's
this bit:
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cfffbd20), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cfffbd20), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cfae5840), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cfae5840), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cfae5740), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cfae5740), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cfae5640), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cfae5640), AE_NOT_EXIST
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cfffbd20), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cfffbd20), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cfae5840), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cfae5840), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cfae5740), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cfae5740), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cfae5640), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cfae5640), AE_NOT_EXIST
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Reply to: