Bug#273465: bug report against the installation-reports
Package: installation-reports
Debian-installer-version: 25 Sep 2004,
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-
netinst.iso 06-Aug-2004 23:18 112M
uname -a: Linux lap 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i586
GNU/Linux
Date: 25 Sep 2004
Method: Network install using above ISO image. No Proxy.
Machine: Toshiba Satellite 1640CDT Notebook
Processor: AMD K6-2+ 475MHz
Memory: 192MB
Root Device: IDE
Root Size/partition table: 512MB swap, 19GB /
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
0000:00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev
04)
0000:00:04.0 CardBus bridge: Texas Instruments PCI1420
0000:00:04.1 CardBus bridge: Texas Instruments PCI1420
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin
IV] (rev 0a)
0000:00:08.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI
Audio (rev 01)
0000:00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev 20)
0000:00:10.0 Communication controller: Rockwell International HSF 56k
Data/Fax Modem (rev 01)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
(rev 09)
0000:00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro
AGP-133 (rev dc)
0000:00:00.0 0600: 10b9:1541 (rev 04)
0000:00:01.0 0604: 10b9:5243 (rev 04)
0000:00:04.0 0607: 104c:ac51
0000:00:04.1 0607: 104c:ac51
0000:00:07.0 0601: 10b9:1533 (rev 0a)
0000:00:08.0 0401: 1013:6005 (rev 01)
0000:00:0f.0 0101: 10b9:5229 (rev 20)
0000:00:10.0 0780: 127a:2013 (rev 01)
0000:00:11.0 0680: 10b9:7101 (rev 09)
0000:00:13.0 0c03: 10b9:5237 (rev 03)
0000:01:00.0 0300: 1002:4c42 (rev dc)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I could not configure WEP key for wireless network as it would not let me
choose which of the four keys that WEP can use, [1-4]. I use key [2] and
needed to enter the wep key as "[2] xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx" but
this was rejected as an invalid key.
The installer always defaulted to key [1] which failed on my system,
however, when I reconfigured my wireless network to use key [1] the
installer worked fine.
Previously I had to edit '/etc/network/interfaces' after a semi-successful
install, to use key [2], for the network to work.
If the installer could allow for keys in the format "[x]
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xx" it would be of great help.
Reply to: