Bug#273024: debian installer report
Package: installation-reports
Debian-installer-version: netinst RC1 cd image 23-Sept 2004 0800 CST
uname -a: Linux audit01 2.4.26-1-386 #1 Thu July 22 12:46:23 JST 2004 i686
GNU/Linux
Date: 23-Sept 2004 0900 CST
Method: CD Image, local CD drive (/dev/hdc)
Machine: Dell Latitude C610 Laptop
Processor: 1GHz Pentium III
Memory: 512MB
Root Device: IDE, hda
Root Size/partition table:
/dev/had1 5341581 blocks / ext3
/dev/hda2 14193427 blocks W95 Ext'd (LBA)
/dev/hda5 3903763 blocks /home ext3
/dev/hda6 497983 blocks swap swa
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 04)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42) 0000:00:1f.0
ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02) 0000:00:1f.1 IDE
interface: Intel Corp. 82801CAM IDE U100 (rev 02) 0000:00:1f.5 Multimedia
audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility
M6 LY 0000:02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 78) 0000:02:01.0 CardBus bridge: Texas Instruments PCI1420
0000:02:01.1 CardBus bridge: Texas Instruments PCI1420
0000:00:00.0 0600: 8086:3575 (rev 04)
0000:00:01.0 0604: 8086:3576 (rev 04)
0000:00:1d.0 0c03: 8086:2482 (rev 02)
0000:00:1e.0 0604: 8086:2448 (rev 42)
0000:00:1f.0 0601: 8086:248c (rev 02)
0000:00:1f.1 0101: 8086:248a (rev 02)
0000:00:1f.5 0401: 8086:2485 (rev 02)
0000:00:1f.6 0703: 8086:2486 (rev 02)
0000:01:00.0 0300: 1002:4c59
0000:02:00.0 0200: 10b7:9200 (rev 78)
0000:02:01.0 0607: 104c:ac51
0000:02:01.1 0607: 104c:ac51
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [)]
Comments/Problems:
Wow! This really worked great. I had installed two other systems recently
using the old method and this cut the install time in half, even though some
of the configuration utilities were new to me (partitioning the hard drive,
package selection using Aptitude).
Reply to: