Bug#271913: installation-report
Package: installation-reports
Debian-installer-version: from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/
as of 13-Sep-2004
uname -a:
Linux d130-140 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686
GNU/Linux
Date: Sep. 16, 2004
Method: cdrom boot followed by network install
from http://ftp.jp.debian.org/debian/ testing main
Machine: NEC PC98-NX Mate R MY24X/R-D
Processor:vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Celeron(R) CPU 2.40GHz
stepping : 9
cpu MHz : 2391.187
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 4771.02
Memory: 384 MB
Root Device: IDE
Root Size/partition table
/dev/hda1 6728280 1612820 4773680 26% /
/dev/hda6 24067008 34344 22810124 1% /home
/dev/hda3 6728312 120104 6266428 2% /var
# lspci
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE
DRAM Controller/Host-Hub Interface (rev 03)
0000:00:02.0 VGA compatible controller: Intel Corp.
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
Device (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M)
USB 2.0 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 82)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC
Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L)
UltraATA-100 IDE Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
0000:01:00.0 Ethernet controller: Intel Corp. 82545GM Gigabit
Ethernet Controller (rev 04)
0000:01:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE
(LOM) Ethernet Controller (rev 82)
# lspci -n
0000:00:00.0 0600: 8086:2560 (rev 03)
0000:00:02.0 0300: 8086:2562 (rev 03)
0000:00:1d.0 0c03: 8086:24c2 (rev 02)
0000:00:1d.1 0c03: 8086:24c4 (rev 02)
0000:00:1d.7 0c03: 8086:24cd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 82)
0000:00:1f.0 0601: 8086:24c0 (rev 02)
0000:00:1f.1 0101: 8086:24cb (rev 02)
0000:00:1f.3 0c05: 8086:24c3 (rev 02)
0000:00:1f.5 0401: 8086:24c5 (rev 02)
0000:01:00.0 0200: 8086:1026 (rev 04)
0000:01:08.0 0200: 8086:1039 (rev 82)
Base System Installation Checklist:
Initial boot worked: [ok]
Configure network HW: [ok ]
Config network: [ok ]
Detect CD: [ok ]
Load installer modules: [ok ]
Detect hard drives: [ok ]
Partition hard drives: [ok ]
Create file systems: [ok ]
Mount partitions: [ok ]
Install base system: [ok ]
Install boot loader: [ok ]
Reboot: [ok ]
Comments/Problems:
The problem is the key map of X window.
I use a japanese key board (jp106). Though the
console keymap is OK, the keymap of X window is
not correct. Even after I manually edited the
/etc/X11/XF86Config-4,
from:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
to:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "jp106"
Option "XkbLayout" "jp"
EndSection
I could not correct the problem though the latter configuration
works good in other distribution or the previous debian installer
(ie. the installer as of 8/27/2004). Whether I install the
system with the installer language of English or Japanese, the
situation was the same . The only way I could get the correct
keyboard was
Option "XkbDisable"
in the Section "InputDevice".
Reply to: