Bug#269047: d-i RC1 installation report (success with lilo)
Package: installation-reports
Debian-installer-version: 20040801
uname -a: Linux mame 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i586 GNU/Linux
Date: 2004-08-30
Method: boot from netboot/2.6/{vmlinuz,initrd.gz} with lilo. packages
are taken from ftp2.jp.debian.org.
Machine: Toshiba Libretto 100
Processor: Pentium MMX 166Mhz
Memory: 64MB
Root Device: IDE
Root Size/partition table:
Disk /dev/hda: 6007 MB, 6007357440 bytes
255 heads, 63 sectors/track, 730 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Mount Device Boot Start End Blocks Id System
/dev/hda1 * 1 262 2104483+ b W95 FAT32
/boot /dev/hda2 263 267 40162+ 83 Linux
/ /dev/hda3 268 715 3598560 83 Linux
/dev/hda4 716 730 120487+ 82 Linux swap
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Toshiba America Info Systems 601 (rev 2e)
0000:00:04.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01)
0000:00:11.0 Communication controller: Toshiba America Info Systems FIR Port (rev 22)
0000:00:13.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
0000:00:13.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
# lspci -n
0000:00:00.0 0600: 1179:0601 (rev 2e)
0000:00:04.0 0300: 10c8:0004 (rev 01)
0000:00:11.0 0780: 1179:0701 (rev 22)
0000:00:13.0 0607: 1179:060a (rev 07)
0000:00:13.1 0607: 1179:060a (rev 07)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
lilo parameter is below.
image=/boot/di/nb/2.6/vmlinuz
label=nb26
initrd=/boot/di/nb/2.6/initrd.gz
root=/dev/ram0
append="devfs=mount,dall ramdisk_size=17000"
"root=" is not /dev/ram but /dev/ram0.
Reply to: