Bug#267724: successful installation report
Package: installation-reports
DEBIAN-INSTALLER-VERSION: .../i386/rc1/sarge-i386-netinst.iso
UNAME -A: Linux aptos 2.6.7 #1 Fri Aug 20 01:45:39 PDT 2004 i686 GNU/Linux
DATE: August 19th 2004
METHOD: Network install, using the sluglug.ucsc.edu mirror
MACHINE: custom assembled years ago by a commercial Linux vendor
PROCESSOR: Pentium II
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 3
model name : Pentium II (Klamath)
stepping : 4
cpu MHz : 233.885
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov mmx
bogomips : 460.80
MEMORY: MemTotal: 127324 kB
ROOT DEVICE: SCSI /dev/sda
ROOT SIZE/PARTITION TABLE:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sda1 / ext3 defaults,errors=remount-ro 0 1
/dev/sda5 none swap sw 0 0
/dev/hda /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
OUTPUT OF LSPCI AND LSPCI -N:
----------------------------------------------------------------------
0000:00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
0000:00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 80
Bus: primary=00, secondary=01, subordinate=01, sec-latency=80
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
Flags: bus master, medium devsel, latency 0
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 80
I/O ports at d800 [size=16]
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 80, IRQ 10
I/O ports at d400 [size=32]
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
Flags: medium devsel, IRQ 9
0000:00:09.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
Subsystem: Linksys: Unknown device 0574
Flags: bus master, medium devsel, latency 80, IRQ 10
I/O ports at d000 [size=256]
Memory at e3000000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
0000:00:0a.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) (prog-if 00 [VGA])
Subsystem: S3 Inc. ViRGE/DX
Flags: bus master, medium devsel, latency 80, IRQ 9
Memory at dc000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
0000:00:0c.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 12)
Flags: bus master, medium devsel, latency 80, IRQ 11
I/O ports at b800 [size=256]
Memory at db800000 (32-bit, non-prefetchable) [size=256]
----------------------------------------------------------------------
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
It was a breeze. I had no problems at all. THANKS!!!!!!!!!!!!!
Jim
Reply to: