Bug#265707: Success RC1, i386
Package: installation-reports
INSTALL REPORT
Debian-installer-version: RC1 netinst, with base
uname -a: Linux debian 2.6.7-1-686 #1 Thu Jul 8 05:36:53 EDT 2004 i686 GNU/Linux
Date: Sat, 14 Aug 2004 16:38:03 +0200
Method: Boot from harddisc, 2.6-install
Machine: Pentium II, Celeron 400mhz
Memory: 128MB
Root Device: IDE, /dev/hda2
Root Size/partition table:
Device Boot Start End Blocks Id System
/dev/hda1 1 16 128488+ 83 Linux
/dev/hda2 * 17 1192 9446220 83 Linux
/dev/hda3 1193 1247 441787+ f W95 Ext'd (LBA)
/dev/hda5 1193 1247 441756 82 Linux swap
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
0000:00:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
0000:00:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 11)
-n:
Disk /dev/hda: 10.2 GB, 10260710400 bytes
255 heads, 63 sectors/track, 1247 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
0000:00:00.0 0600: 8086:7190 (rev 02)
0000:00:01.0 0604: 8086:7191 (rev 02)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0c.0 0200: 10ec:8029
0000:00:0e.0 0400: 109e:036e (rev 11)
0000:00:0e.1 0480: 109e:0878 (rev 11)
0000:01:00.0 0300: 10de:0028 (rev 11)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O] see note below
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Wohooo, a great install again. Everything went fine. I chose "Desktop
Environment" in Tasksel... my Nvidia-TNT2, mouse and X were configured fine!
I booted off /dev/hda1 where the installer iso was saved. But when I look into
my fstab, /dev/hda1 gets mounted on /media/usb0?? uh? Why usb0?
Dennis
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda2 / ext3 defaults,errors=remount-ro 0 1
/dev/hda5 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
/dev/hda1 /media/usb0 auto rw,user,noauto 0 0
Reply to: