Package: installation-reports INSTALL REPORT Debian-installer-version: RC1 sparc64/netboot/boot.img uname -a: Linux ultra5 2.4.26-sparc64 #1 Sun Jun 20 02:39:17 PDT 2004 sparc64 GNU/Linux Date: 2004_08_11 Method: tftpboot, dhcp, ftp install Machine: Sun ultra5 Processor: UltraSparc IIi 270 Mhz Memory: 192 Mo Root Device: /dev/hda 20 Go Root Size/partition table: Disk /dev/hda (Sun disk label): 16 heads, 63 sectors, 38792 cylinders Units = cylinders of 1008 * 512 bytes Device Flag Start End Blocks Id System /dev/hda1 0 37799 19050696 1 Boot /dev/hda2 37799 38792 500472 82 Linux swap /dev/hda3 0 38792 19551168 5 Whole disk Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi 0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11) 0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11) 0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a) 0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 (rev 03) 0000:00:00.0 0600: 108e:a000 0000:00:01.0 0604: 108e:5000 (rev 11) 0000:00:01.1 0604: 108e:5000 (rev 11) 0000:01:01.0 0680: 108e:1000 (rev 01) 0000:01:01.1 0200: 108e:1001 (rev 01) 0000:01:02.0 0300: 1002:4754 (rev 9a) 0000:01:03.0 0101: 1095:0646 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [ O] Configure network HW: [ O] Config network: [ O] Detect CD: [ ] Load installer modules: [ O] Detect hard drives: [ O] Partition hard drives: [ O] Create file systems: [ O] Mount partitions: [ O] Install base system: [ O] Install boot loader: [ O] Reboot: [ O] Comments/Problems: Tftpboot. No framebuffer (disabled by default on sparc I think) so languagechooser was a little dirty but readable. I was able to do a french install with a standard us sunkeyboard. Partman didn't propose the automatic partitioning but it did a great job and created the sun disklabel and the partitions. I didn't try to do a X install. Will do another install. Thanks for your work ! -- Thomas Poindessous
Attachment:
partman.gz
Description: Binary data