[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#264986: Installation report, finnish locale problems



Package: installation-reports

INSTALL REPORT

Debian-installer-version: Debian installation CD-ROM, built on 20040801,
  http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso
uname -a: Linux peli 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux

Date: 2004-08-10 20-23 Finnish time (EET)
Method: Booted from netinst CD, got other packages from ftp.fi.debian.org via my LAN, there is a router and 1Mbit/512kbit ADSL. No proxies. 

Machine: Dell PowerEdge 1400SC
Processor: Xeon 1GHz
Memory: 256M
Root Device: fdisk -l shows

Disk /dev/sda: 18.2 GB, 18210036736 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1         606     4867663+  83  Linux
/dev/sda2             607        2213    12908227+   f  W95 Ext'd (LBA)
/dev/sda5             607        2151    12410181   83  Linux
/dev/sda6            2152        2213      497983+  82  Linux swap

--/etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/sda1       /               ext3    defaults,errors=remount-ro 0       1
/dev/sda5       /home           ext3    defaults        0       2
/dev/sda6       none            swap    sw              0       0
/dev/hda        /media/cdrom0   iso9660 ro,user,noauto  0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

--end of file

SCSI hard disks, IDE CD-ROM. 

Output of lspci and lspci -n:

0000:00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
0000:00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
0000:00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04)
0000:01:02.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
0000:01:02.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)


0000:00:00.0 0600: 1166:0009 (rev 06)
0000:00:00.1 0600: 1166:0009 (rev 06)
0000:00:02.0 0200: 8086:1229 (rev 08)
0000:00:0e.0 0300: 1002:4752 (rev 27)
0000:00:0f.0 0601: 1166:0200 (rev 50)
0000:00:0f.1 0101: 1166:0211
0000:00:0f.2 0c03: 1166:0220 (rev 04)
0000:01:02.0 0100: 9005:00cf (rev 01)
0000:01:02.1 0100: 9005:00cf (rev 01)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Bug: kde-i18n-fi not installed.

KDE is installed because I chose the Desktop task. However, it does
not install kde-i18n-fi, although I chose country and language as
Finland and finnish. The only language available in KDE is
english. Gnome works in finnish.

Bug: X Window keyboard is USA. 

Finnish keyboard works in console, but X Window uses USA keyboard. X
Window configuration went OK, except it did not ask what keyboard I
want. I used the default level for questions.

These lines are in /etc/X11/XF86config-4:

	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"

For finnish keyboards, there should be pc105 and fi. 

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>

Other finnish users have wanted fi_FI.utf8 as default finnish
locale. I use that too, but change the locale with dpkg-reconfigure
locales.

Some typos and bad wording in finnish texts, but I'm one of the
finnish translators so those I have to fix myself.

There was one user who specifically says the finnish translation is
good.



PS Bug: The gdm login screen was in finnish and even after a reboot I'm
almost sure it was in finnish. Now it is in english even if I changes
in from Language drop down menu to finnish.

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.



Reply to: