[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#261376: hppa testing (sarge) very slow installer + partitioner failed

Package: installation-reports

Debian-installer-version: 2004-07-25
i get the boot.img from

uname -a: <The result of running uname -a on a shell prompt>
Date: 2004-07-25
Method: i boot from lan with the bootpd running on another local machine
directly connected

Machine: HP 9000 Model 712/60
Processor: PA-RISC
Memory: 128M
Root Device: SCSI
Root Size/partition table: I let the partionner do a complete
reinitialization, i choose multi-user environnment
no PALO partition was created.

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O] done it manually
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [E] no PALO partition (f0)
Create file systems:    [E] very very slow or crashed
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems: the installer is much slower than the one from woody

On woody there was no time between an anwser and the next page.

Here it takes at least 4 seconds after validating a screen to get to the
next one.



Reply to: