Package: installation-reports INSTALL REPORT Debian-installer-version: netboot daily from 01. August 2004 uname -a: Linux cobalt 2.4.26-r5k-cobalt #1 Sun Jun 13 22:32:36 UTC 2004 mips GNU/Linux Date: Sun Aug 1 21:20:27 CEST 2004 Method: netboot with nfs, fetched packages from http mirror, no proxy Machine: cobalt qube 2 Processor: nevada V10.0 Memory: 64 Mb Root Device: FUJITSU MHC2040AT, ATA DISK drive Root Size/partition table: as done by the autoinstaller. /boot ext2r0, / ext3 Output of lspci and lspci -n: 0000:00:00.0 Memory controller: Marvell Technology Group Ltd.: Unknown device 4146 (rev 11) 0000:00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 0000:00:09.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 27) 0000:00:09.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:09.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02) 0000:00:0a.0 Network controller: Elsa AG QuickStep 1000 (rev 01) 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: - after the reboot dialogs had different borders, before they were nicely line-drawn, afterwards ugly umlauts - after the reboot i get asked again for apts access method mirrors etc, is that necessary ? - works really well! -- Robert Lemmen http://www.semistable.com
Attachment:
signature.asc
Description: Digital signature