[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#262293: INSTALL REPORT



Package: installation-reports

INSTALL REPORT

Debian-installer-version: 
uname -a: Linux Pademelon 2.6.7-1-686 #1 Thu Jul 8 05:36:53 EDT 2004 i686 GNU/Linux
Date:Fri Jul 30 2004 
Method: Network, tftp-PXE from LAN, ftp.wa.au.debian.org via proxy on LAN

Machine: HP PII Vectra VL509 mobo, BX chipset.
Processor:Pentium II (Deschutes) 334.189
Memory:64Mb
Root Device: /dev/hda2
Root Size/partition table:  
Pademelon:~# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda2             447M  178M  246M  42% /
tmpfs                  31M     0   31M   0% /dev/shm
/dev/hda1              45M   11M   32M  26% /boot
Pademelon:~# fdisk -l /dev/hda

Disk /dev/hda: 3228 MB, 3228696576 bytes
128 heads, 63 sectors/track, 782 cylinders
Units = cylinders of 8064 * 512 = 4128768 bytes

   Device Boot      Start         End      Blocks   Id  System
   /dev/hda1               1          12       48352+  83  Linux
   /dev/hda2              13         133      487872   83  Linux
   Pademelon:~# 

   
Output of lspci and lspci -n:
Pademelon:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP (rev 02)
Pademelon:~# lspci -n
0000:00:00.0 0600: 8086:7190 (rev 02)
0000:00:01.0 0604: 8086:7191 (rev 02)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0b.0 0200: 10b7:9055 (rev 24)
0000:01:00.0 0300: 102b:1001 (rev 02)
Pademelon:~# 



Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O] 
Config network:         [O]
Detect CD:              [ ] None
Load installer modules: [E]
Detect hard drives:     [O]
Partition hard drives:  [ ] cfdisk is better
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:
The installer downloaded stuff I don't need. Such as firewire support. I have no firewire.

Why do we have symlinks in / for initrd, kernel?
I really don't like the disk setup.

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>

I really don't want to waste time installing exim.

Install logs and other status info is available in /var/log/debian-installer/.
Do you want those?


Once you have filled out this report, mail it to submit@bugs.debian.org.

A firt bit of this info could be put in by the installer: 
cat /proc/cpuinfo
free
cat /etc/network/interfaces # shows how cards got configured

Oh, you could put a to: header at the top and a note on how to mail with "sendmail."




Reply to: