Bug#262071: Debian-installer install report
Package: installation-reports
> INSTALL REPORT
>
> Debian-installer-version:
base-installer 0.093
> uname -a:
Now: Linux saphir 2.6.7-1-k7 #1 Thu Jul 8 06:45:35 EDT 2004 i686
GNU/Linux
(installed using kernel-image-2.4.26-1-386)
> Date:
???
> Method: How did you install? What did you boot off? If network
> install, from where? Proxied?
Network install from ftp.proxad.net using "20040720 Daily build" CD,
NAT + dhcp gateway.
> Machine:
> Processor:
Athlon XP 2400+
> Memory:
512MB
> Root Device:
/dev/hda
> Root Size/partition table:
Disk /dev/hda: 122.9 GB, 122942324736 bytes
16 heads, 63 sectors/track, 238216 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 496 249952+ 6 FAT16
/dev/hda2 497 1984 749952 e W95 FAT16 (LBA)
/dev/hda3 1985 238216 119060928 f W95 Ext'd (LBA)
/dev/hda5 1985 3922 976720+ 82 Linux swap
/dev/hda6 3923 7797 1952968+ 83 Linux
/dev/hda7 7798 13610 2929720+ 83 Linux
/dev/hda8 13611 42674 14648224+ 83 Linux
/dev/hda9 42675 52362 4882720+ 83 Linux
/dev/hda10 52363 62050 4882720+ 83 Linux
/dev/hda11 62051 81426 9765472+ 83 Linux
/dev/hda12 180088 238216 29296984+ 83 Linux
hda1 and hda2 are empty (reserved for future DOS installation)
hda3 is to be changed to Linux Extended (85)
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda6 / ext3 defaults,errors=remount-ro 0
1
/dev/hda10 /home ext3 defaults 0 2
/dev/hda11 /home/marc/docs ext3 defaults 0 2
/dev/hda9 /tmp ext3 defaults 0 2
/dev/hda8 /usr ext3 defaults 0 2
/dev/hda7 /var ext3 defaults 0 2
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/hdd /media/cdrom1 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
> Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600
AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280
[Radeon 9200 SE] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon
9200 SE] (Secondary) (rev 01)
# lspci -n
0000:00:00.0 0600: 1106:3189 (rev 80)
0000:00:01.0 0604: 1106:b198
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 1002:5964 (rev 01)
0000:01:00.1 0380: 1002:5d44 (rev 01)
> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Initial boot worked: [E]
> Configure network HW: [O]
> Config network: [O]
> Detect CD: [O]
> Load installer modules: [O]
> Detect hard drives: [O]
> Partition hard drives: [O]
> Create file systems: [O]
> Mount partitions: [O]
> Install base system: [O]
> Install boot loader: [O]
> Reboot: [O]
>
> Comments/Problems:
I had to use debian-installer/framebuffer=false
(VIA AGP + ATI Radeon 9200SE [see above] + Futura HD17A TTF screen)
There's a typo in the French message about GRUB:
"systèmed'exploitation" should read "système d'exploitation".
> Install logs and other status info is available
in /var/log/debian-installer/.
> Once you have filled out this report, mail it to
submit@bugs.debian.org.
Thank you for all your work!
--
Marc Mezzarobba
-------------------------------------------------------
--
Marc Mezzarobba
Reply to: