Bug#260154: PowerMac G3 (beige) sarge d-i Installation Report
Package: installation-reports
Debian-installer-version: sarge powerpc tcl.1 9 June 2004
uname -a: Linux Homer 2.4.25-powerpc #1 mer avr 14 15:38:38 CEST 2004
ppc GNU/Linux
Date: 18 July 2004 circa 5pm BST
Method: Installed BootX 1.2.2 from http://penguinppc.org/projects/bootx/
copied initrd.gz and vmlinuz from d-i tc1 CD to "Linux Kernels" in the
MacOS System Folder
Configured Bootx to boot from the RamDisk (initrd.gz in the System
Folder) and hey presto the sarge installer appeared ;) (I tried the
2.6.7 kernel but the G3 doesn't have USB - kernel panic)
Proxied=No
Machine: PowerMac G3 Beige (old world)
Processor: 266MHz Processor
Memory: 96Mb
Root Device: IDE: ATA Disk QUANTUM FIREBALL SE4.3A 4Gb
Root Size/partition table:
# type name length base (
# size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1
( 31.5k) Partition map
/dev/hda2 Apple_Driver_ATA Macintosh 54 @
64 ( 27.0k) Unknown
/dev/hda3 Apple_Driver_ATA Macintosh 74 @
118 ( 37.0k) Unknown
/dev/hda4 Apple_Patches Patch Partition 512 @
192 (256.0k) Unknown
/dev/hda5 Apple_HFS untitled 614400 @
704 (300.0M) HFS
/dev/hda6 Apple_UNIX_SVR2 / 4492188 @
615104 ( 2.1G) Linux native
/dev/hda7 Apple_UNIX_SVR2 /var 781251 @
5107292 (381.5M) Linux native
/dev/hda8 Apple_UNIX_SVR2 swap 336914 @
8081902 (164.5M) Linux swap
/dev/hda9 Apple_UNIX_SVR2 /home 2193359 @
5888543 ( 1.0G) Linux native
Output of lspci:
0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
0000:00:10.0 Class ff00: Apple Computer Inc. Heathrow Mac I/O
(rev 01)
0000:00:12.0 VGA compatible controller: ATI Technologies Inc 3D
Rage Pro 215GP (rev 5c)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O] wish list - option to configure
manually
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [ ] No boot loader installed (using
Bootx to boot)
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try
it
Comments/Problems:
It all worked pretty much "out of the box" - thanks for a very
smooth installer ;)
I had to use modconf to load dma_sound and sound_core modules
but no real problem.
I'm having a problem getting better resolution than 800X600 -
I'd prefer 1024X768
I need to add some memory given that I'm trying to run kde and
OOo ;)
I will probably put up a Beige G3 howto page somewhere but would
be happy to contribute to the installation manual, if required.
So thanks again to all you developers and maintainers for your
excellent work! It is the first time I've had Debian on this G3
;)
Regards
Clive
--
http://www.clivemenzies.co.uk
strategies for business
Reply to: