Bug#258909:
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <11/7/04 -sid_d-i mirror.kernel.org>
uname Linux mylaptopdeb 2.6.6-1-386 #1 Wed May 12 13:19:06 EST 2004 i686
GNU/Linux
Date: 11/7/14:00
Method: How did you install? expert What did you boot off? cdrom If
network
install, from where? mirror.rcn.net Proxied? no
Machine: Sager 5680
Processor:piv 2.8 ht
Memory: 512
Root Device: toshiba hd
Root Size/partition table:
Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 3697 29696121 7 HPFS/NTFS
/dev/hda2 3698 7165 27856710 83 Linux
/dev/hda3 7166 7296 1052257+ 82 Linux swap
Output of lspci and lspci -n:
yazdzik@mylaptopdeb:~$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller
(rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface
to PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller
(rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Modem
Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10]
0000:03:00.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus
Controller
0000:03:01.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
0000:03:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8169 Gigabit Ethernet (rev 10)
0000:03:04.0 Network controller: Intersil Corporation Intersil ISL3890
[Prism GT/Prism Duette] (rev 01)
yazdzik@mylaptopdeb:~$yazdzik@mylaptopdeb:~$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller
(rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface
to PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller
(rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Modem
Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10]
0000:03:00.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus
Controller
0000:03:01.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
0000:03:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8169 Gigabit Ethernet (rev 10)
0000:03:04.0 Network controller: Intersil Corporation Intersil ISL3890
[Prism GT/Prism Duette] (rev 01)
yazdzik@mylaptopdeb:~$ lspci -n
0000:00:00.0 Class 0600: 8086:2570 (rev 02)
0000:00:01.0 Class 0604: 8086:2571 (rev 02)
0000:00:1d.0 Class 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 Class 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 Class 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 Class 0c03: 8086:24de (rev 02)
0000:00:1d.7 Class 0c03: 8086:24dd (rev 02)
0000:00:1e.0 Class 0604: 8086:244e (rev c2)
0000:00:1f.0 Class 0601: 8086:24d0 (rev 02)
0000:00:1f.1 Class 0101: 8086:24db (rev 02)
0000:00:1f.3 Class 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 Class 0401: 8086:24d5 (rev 02)
0000:00:1f.6 Class 0703: 8086:24d6 (rev 02)
0000:01:00.0 Class 0300: 1002:4e50
0000:03:00.0 Class 0607: 1524:1410
0000:03:01.0 Class 0c00: 104c:8026
0000:03:03.0 Class 0200: 10ec:8169 (rev 10)
0000:03:04.0 Class 0280: 1260:3890 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O ]
Reboot: [ok]
Comments/Problems:
The major problem is now that although the ati radeon xconfig file shows
dri should load, it does not, and I do not have 3d acceleration -
without it, back to windows....
One must manually copy and paste the isl3890 file for the prism duette
driver into /usr/lib/hotplug/firmware - I stole it from knoppix, by
emailing the ils3980 file to myself, as it is the easiest and most
foolproof way.... probably not the right way.
Since the ati drivers worked in libranet, with the 2.4.26 kernel, I
cannot figure out why 3d accel is not working, but the ati file ccannot
be compiled fromsource, as there is no way to establish the permissions.
The installer should make sure the the paths to the dri module are
correct during the originial x configuration, else, there is no way for
the end user to get back in, as fglxrconfig just gives more of the same.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: