[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: SATA test on SATA-VIA partial success.



[Marco Amadori]
> - The 2.4 images didnt recognized the two serial ata discs until i manually 
> "modprobe sata_sis" and retried, then the installation went fine on /dev/sdb1 
> (opposed to /dev/hdb in my current working 2.6 unstable installation).
[...]
> marco@tremendo:~$ lspci -n && dmesg | grep -i " ide "
> 0000:00:00.0 Class 0600: 1106:3189 (rev 80)
> 0000:00:01.0 Class 0604: 1106:b198
> 0000:00:0b.0 Class 0401: 1102:0004 (rev 03)
> 0000:00:0b.1 Class 0980: 1102:7003 (rev 03)
> 0000:00:0f.0 Class 0104: 1106:3149 (rev 80)
> 0000:00:0f.1 Class 0101: 1106:0571 (rev 06)
> 0000:00:10.0 Class 0c03: 1106:3038 (rev 81)
> 0000:00:10.1 Class 0c03: 1106:3038 (rev 81)
> 0000:00:10.2 Class 0c03: 1106:3038 (rev 81)
> 0000:00:10.3 Class 0c03: 1106:3038 (rev 81)
> 0000:00:10.4 Class 0c03: 1106:3104 (rev 86)
> 0000:00:11.0 Class 0601: 1106:3227
> 0000:00:11.5 Class 0401: 1106:3059 (rev 60)
> 0000:00:12.0 Class 0200: 1106:3065 (rev 78)
> 0000:01:00.0 Class 0300: 10de:0326 (rev a1)

This is the current status in CVS for the given PCI ids:

% egrep "11063189|1106b198|11020004|11027003|11063149|11060571|11063038|11063038|11063038|11063104|11063227|11063059|11063065|10de0326" pci.lst
  11020004  unknown snd-emu10k1 SB Audigy
  11027003  joystick emu10k1-gp  SB Audigy MIDI/Game port
  11060571  ide ignore VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
  11063038  usb     usb-uhci  VT82xxxxx UHCI USB 1.1 Controller
  11063059  sound   via82cxxx_audio VT8233/A/8235/8237 AC97 Audio Controller
  11063065  ethernet  via-rhine VT6102 [Rhine-II]
  11063104  usb     ehci-hcd  USB 2.0
  11063149  ide     sata_promise  VIA VT6420 SATA RAID Controller
  11063189  unknown unknown VT8377 [KT400/KT600 AGP] Host Bridge
  11063227  unknown unknown VT8237 ISA bridge [K8T800 South]
  1106b198  unknown unknown VT8237 PCI Bridge

The entry for 11063149 was updated by me today (see bug #250860).  Is
it wrong?  Should it be using module 'sata_sis' instead?



Reply to: