Bug#254876: installation-reports: Success with Sarge TC1 110MB CD image on MSI KT6V-LSR
Package: installation-reports
Severity: normal
Debian-installer-version: 17-06-2004 (sarge test candidate 1)
uname -a: Linux acapella 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux
Date: 17-06-2004
Method: boot and base system from debian installer CD (110 MB image) +
network (ftp.uk.debian.org), no proxy
Machine: self-built, MSI KT6V-LSR MoBo
Processor: Athlon XP 2200+
Memory: 512 MB, Crucial Value PC2700 DDR
Root Device: Seagate ST380011A (80GB IDE)
Root Size/partition table:
Partition Table for /dev/hda
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
1 0x80 1 1 0 0x83 254 63 242 63 3903732
2 0x00 0 1 243 0x0F 254 63 1023 3903795 150400530
3 0x00 254 63 1023 0x83 254 63 1023 154304325 1992060
4 0x00 0 0 0 0x00 0 0 0 0 0
5 0x00 1 1 243 0x83 254 63 1023 63 78124032
6 0x00 254 63 1023 0x83 254 63 1023 63 39070017
7 0x00 254 63 1023 0x83 254 63 1023 63 19534977
8 0x00 254 63 1023 0x83 254 63 1023 63 13671252
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/hda1 / ext3 defaults,errors=remount-ro 0 1
/dev/hda5 /home ext3 defaults 0 2
/dev/hda8 /tmp ext3 defaults 0 2
/dev/hda6 /usr ext3 defaults 0 2
/dev/hda7 /var ext3 defaults 0 2
/dev/hda3 none swap sw 0 0
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:07.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Worked a treat! GRUB's autodetection of a previous dual-boot
installation on the 2nd HD (/dev/hdd) was particularly impressive.
Although I had to edit menu.lst manually (hdd used to be hda)
as well as change /etc/fstab in the old installation, I could boot into
the old system without problems.
-- System Information:
Debian Release: testing/unstable
Architecture: i386 (i686)
Kernel: Linux 2.6.5
Locale: LANG=en_GB.iso885915, LC_CTYPE=en_GB.iso885915
Reply to: