Bug#250386: Installation report again
Package: installation-reports
INSTALL REPORT
Debian-installer-version: built 20040521 downloaded from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/sarge-i386-netinst.iso
uname -a: Linux localhost 2.6.5-1-386 #2 Fri Apr 30 20:13:30 EST 2004
i686 GNU/Linux
Date: 22th May 2004
Method: I installed Debian booting from cdrom netinst.iso image
Machine: ia-32 machine,home made box, mother board QDI KINETIZ 7EA
Processor:AMD Athlon 1200 MHz
Memory:256 MB
Root Device: hda: Seagate ST340810A, ATA DISK drive
hdb: Seagate ST34321A, ATA DISK drive
Root Size/partition table:
/dev/hda3 is the root partition where I have tested the new installer
/dev/hda6 is were I have woody and I work daily
Disk /dev/hda: 40.0 GB, 40020664320 bytes
16 heads, 63 sectors/track, 77545 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 20321 10241406 7 HPFS/NTFS
/dev/hda2 40641 77536 18595584 f W95 Ext'd (LBA)
/dev/hda3 * 20322 40640 10240776 83 Linux
/dev/hda5 40641 60961 10241406 83 Linux
/dev/hda6 60962 77218 8193118+ 83 Linux
/dev/hda7 77218 77536 160587 82 Linux swap
In /dev/hdb1 I have the Hurd K-6 mini.iso installed and working.
Disk /dev/hdb: 4303 MB, 4303272960 bytes
255 heads, 63 sectors/track, 523 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 243 1951866 83 Linux
/dev/hdb2 244 486 1951897+ b W95 FAT32
/dev/hdb3 487 523 297202+ 82 Linux swap
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365
[KT133/KM133] (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 1a)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 1a)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
0000:00:0a.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0e.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
0000:00:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA
TNT2 Model 64/Model 64 Pro] (rev 15)
# lspci -n
0000:00:00.0 Class 0600: 1106:0305 (rev 03)
0000:00:01.0 Class 0604: 1106:8305
0000:00:07.0 Class 0601: 1106:0686 (rev 40)
0000:00:07.1 Class 0101: 1106:0571 (rev 06)
0000:00:07.2 Class 0c03: 1106:3038 (rev 1a)
0000:00:07.3 Class 0c03: 1106:3038 (rev 1a)
0000:00:07.4 Class 0680: 1106:3057 (rev 40)
0000:00:0a.0 Class 0401: 1274:5880 (rev 02)
0000:00:0b.0 Class 0200: 10ec:8139 (rev 10)
0000:00:0e.0 Class 0400: 109e:036e (rev 11)
0000:00:0e.1 Class 0480: 109e:0878 (rev 11)
0000:01:00.0 Class 0300: 10de:002d (rev 15)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Hello dear development team!
I have just tested successfully the new debian installer. I have used
linux26 option and everything was ok. Only a bit things didn't work. The
installer did not detect my other SO's installed, such as Debian in
/dev/hda6, Debian/GNU Hurd in /deb/hdb1 and windogXP in /dev/hda1.
I choosed "es" keyboard and "es_ES" language. At the end of the
installation, the keyboard was not properly configured. I have found
that this is a problem relalated only to the "linux26" 2.6 kernel
installation, not in the "linux" installation and the 2.4 kernel.
There are some bugs with translation into spanish, I do not know if you
need this kind of information, but sometimes there are pages partialy
translated, with english and spanish mixed and somw ortographic mistakes.
Thank you for provide this beautiful software.
If you need more information please let me know.
I love Debian.
Ramiro Aceves Casquete (Valladolid, Spain)
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: