Bug#248986: Installation report of Sarge Beta 4 on sparc
Package: installation-reports
Debian-installer-version: Daily ISO built on 20040511 netinst
uname -a: Linux othala 2.4.26-sparc32 #1 Sat Apr 24 00:12:33 EDT 2004
sparc GNU/Linux
Date: Fri May 14 12:32:31 CEST 2004
Method:
I put the CDROM in the drive. Yeah, I did it !
Stop-A
ok boot cdrom
boot: linux
No problem during installation, packages were downloaded from CDROM.
Machine: Sun SparcStation 5
Processor: TurboSparc 170 MHz
cpu : Fujitsu TurboSparc MB86907
fpu : reserved
promlib : Version 3 Revision 2
prom : 2.29
type : sun4m
ncpus probed : 1
ncpus active : 1
BogoMips : 169.57
MMU type : Fujitsu TurboSparc
contexts : 256
nocache total : 1048576
nocache used : 132608
Memory: 64 Mo
Root Device: SCSI
scsi0 : Sparc ESP100A-FAST
scsi1 : Sparc ESP236-FAST
Vendor: IBM Model: DCAS32160SUN2.1G Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Vendor: TOSHIBA Model: XM5701TASUN12XCD Rev: 2395
Type: CD-ROM ANSI SCSI revision: 02
Root Size/partition table:
Device Flag Start End Blocks Id System
/dev/sda1 0 71 147467 1 Boot
/dev/sda2 71 447 780952 83 Linux native
/dev/sda3 0 1017 2112309 5 Whole disk
/dev/sda4 447 917 976190 83 Linux native
/dev/sda5 ur 917 964 97619 83 Linux native
/dev/sda6 u 964 1017 110081 82 Linux swap
Output of lspci:
No PCI :-)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [ ]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I did not have any problem, only some warning during boot of the CDROM
about unimplemented SPARC instruction.
--
Julien Danjou
.''`. Debian developer
: :' : http://jdanjou.org
`. `' http://people.debian.org/~acid
`- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD
Reply to: