Bug#248576: Beta Debian installer on Sparc64 - Kernel panic
Package: installation-reports
Debian-installer-version: <11 May 2004, Beta version for Sparc from Debian
Website, the "110 Mb version">
uname -a: <None (Kernel panic happened before that)>
Date: <11 May 2004, around 18h CET>
Method: <Boot off CD-Rom, I/O on terminal through serial port>
Machine: <Sparc Ultra 30>
Processor: Ultrasparc II 300 MHz
Memory: 256 Mb
Root Device: <Theoretically a SCSI drive, /sca>
Root Size/partition table: <Kernel paniced before this stage>
Output of lspci: N/A
Base System Installation Checklist:
Initial boot worked: [E ]
Configure network HW: [ O]
Config network: [ ]
Detect CD: [ O]
Load installer modules: [ ]
Detect hard drives: [ O]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Kernel panic shortly after launching install, see screen print-out.
[ ENTER - Boot install ] [ Type "rescue" - Boot into rescue mode ]
boot:
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.4.24
Loading initial ramdisk (1808523 bytes at 0x40C00000)...
\
Remapping the kernel... done.
Booting Linux...
PROMLIB: Sun IEEE Boot Prom 3.9.5 1997/04/11 10:03
Linux version 2.4.24-sparc64 (root@zachery) (gcc version 3.3.3 20040125
(prerel4
ARCH: SUN4U
Ethernet address: 08:00:20:9b:dd:f3
initrd extends beyond end of memory (0x00000000c0db988b > 0x000000006ff28000)
disabling initrd
On node 0 totalpages: 32142
zone(0): 32660 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f0072258,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/rd/0 cdrom devfs=mount rw
Calibrating delay loop... 591.46 BogoMIPS
Memory: 254016k available (2504k kernel code, 584k data, 184k init)
[fffff80000]
Dentry cache hash table entries: 32768 (order: 6, 524288 bytes)
Inode cache hash table entries: 16384 (order: 5, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 8192 (order: 3, 65536 bytes)
Page-cache hash table entries: 32768 (order: 5, 262144 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found PSYCHO, control regs at 000001fe00000000
PSYCHO: Shared PCI config space at 000001fe01000000
PCI0(PBMB): Bus running at 33MHz
PCI0(PBMA): Bus running at 66MHz
ebus0: [auxio] [power] [SUNW,pll] [sc] [se] [su] [su] [ecpp] [fdthree]
[eeprom]]
PCIO serial driver version 1.54
su(mouse) at 0x1fff13062f8 (irq = 4,7ea) is a 16550A
Sun Mouse-Systems mouse driver version 1.00
su(kbd) at 0x1fff13083f8 (irq = 9,7e9) is a 16550A
keyboard: not present
SAB82532 serial driver version 1.65
ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
power: Control reg at 000001fff1724000 ... not using powerd.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
sunhme.c:v2.01 26/Mar/2002 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:9b:dd:f3
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem driver Revision: 1.00
sym.0.3.0: setting PCI_COMMAND_INVALIDATE.
sym0: <875> rev 0x3 on pci bus 0 device 3 function 0 irq 4,7e0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
sym0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
Vendor: COMPAQ Model: HD0093172C Rev: 3208
Type: Direct-Access ANSI SCSI revision: 02
Vendor: TOSHIBA Model: CD-ROM XM-6201TA Rev: 1037
Type: CD-ROM ANSI SCSI revision: 02
sym0:0:0: tagged command queuing enabled, command queue depth 16.
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 17773500 512-byte hdwr sectors (9100 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 18:40:15 Jan 30 2004
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver usbkbd
usbkbd.c: :USB HID Boot Protocol keyboard driver
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
sh-2021: reiserfs_read_super: can not find reiserfs on ramdisk(1,0)
Kernel panic: VFS: Unable to mount root fs on 00:00
Press L1-A to return to the boot prom
Reply to: