[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#243397: "installation-reports"



Package: installation-reports

Debian-installer-version: 
4-10-04 i386
http://www.debian.org/devel/debian-installer/

uname -a: Linux atilla 2.4.25-1-686 #1 Tue Feb 24 10:55:59 EST 2004 i686 GNU/Linux

Date: 4-11-04
Method: floppies/network ftp.debian.org expert mode

Machine: Compaq Deskpro
Processor: Celeron 400 Mhz
Memory: 64M system 256M swap
Root Device: IDE /dev/hda1
Root Size/partition table: 

Filesystem            Size  Used Avail Use% Mounted on
/dev/hda1             179M  104M   66M  62% /
/dev/hda2             805M   25M  738M   4% /home
/dev/hda3             905M  171M  686M  20% /var
/dev/hdb2             1.9G  1.3G  456M  75% /usr


Output of lspci:

lspci
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (r
ev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev
 03)
0000:00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
05)
0000:00:0e.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset
(rev 01)
0000:00:14.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:14.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:14.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:14.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/
2X (rev 5c)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:
It was a beautiful installation all the way down to grub.
I had to build a new kernel right away to get wireless working as the 2.4.25 doesn't have CONFIG_NET_RADIO enabled but is necessary to build the hostap driver.  

glenn greenfield




Reply to: