Bug#241790: installation-reports
Package: installation-reports
Debian-installer-version:
Image downloaded on 02 april 2004 from
http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/current/sarge-i386-netinst.iso
sarge-i386-netinst.iso 01-Apr-2004 14:07 102M
md5sum : 0f07ec741ac6e46b58bab5ddff9b2942
uname -a:
Linux aspire1300 2.6.3-1-k7 #2 Tue Feb 24 20:39:50 EST 2004 i686 GNU/Linux
Date: 02 apr 2004
Method: Boot from CD
Machine: Acer Aspire 1304
Processor: Athlon XP 1800+
Memory: 256MB
Root Device: IDE
Root Size/partition table:
hda1 : windows (ignored)
hda5 : swap
hda6 : /
hda7 : another thing (ignored)
hda8 : another thing (ignored)
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1e)
00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40)
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 20)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51)
01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01)
+ a pcmcia wireless lan card, Netgear MA401
Base System Installation Checklist:
Initial boot worked: [E]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
1. Initial boot screen doesn't display properly (many sort of shadow lines). But pressing the F1 key makes display looks correctly.
2. I did base-config before reboot the computer. The cursor and the option selector didn't show correcty.
When I pressed UP key, the option selector disappears,
when I pressed DOWN key, the option selector shows correctly.
3. After complete install, I need to perform each time I boot
ifdown eth1
and
ifup eth1
In order to get my wireless lan card works fine.
cardmgr or dhclient seems to have trouble during the boot process.
Here's a snapshot of syslog :
Apr 2 23:47:15 aspire1300 cardmgr[681]: watching 1 socket
Apr 2 23:47:15 aspire1300 kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Apr 2 23:47:15 aspire1300 kernel: cs: IO port probe 0x0800-0x08ff: clean.
Apr 2 23:47:15 aspire1300 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x2c8-0x2cf 0x4d0-0x4d7
Apr 2 23:47:15 aspire1300 kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Apr 2 23:47:15 aspire1300 cardmgr[682]: starting, version is 3.2.5
Apr 2 23:47:16 aspire1300 kernel: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
Apr 2 23:47:16 aspire1300 kernel: cs: memory probe 0x60000000-0x60ffffff: clean.
Apr 2 23:47:16 aspire1300 cardmgr[682]: socket 0: NetGear MA401RA
Apr 2 23:47:16 aspire1300 /usr/sbin/cron[688]: (CRON) INFO (pidfile fd = 3)
Apr 2 23:47:16 aspire1300 /usr/sbin/cron[689]: (CRON) STARTUP (fork ok)
Apr 2 23:47:16 aspire1300 cardmgr[682]: executing: 'modprobe orinoco_cs'
Apr 2 23:47:16 aspire1300 /usr/sbin/cron[689]: (CRON) INFO (Running @reboot jobs)
Apr 2 23:47:16 aspire1300 kernel: orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
Apr 2 23:47:16 aspire1300 kernel: orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
Apr 2 23:47:16 aspire1300 kernel: eth1: Station identity 001f:0006:0001:0003
Apr 2 23:47:16 aspire1300 kernel: eth1: Looks like an Intersil firmware version 1.3.6
Apr 2 23:47:16 aspire1300 kernel: eth1: Ad-hoc demo mode supported
Apr 2 23:47:16 aspire1300 kernel: eth1: IEEE standard IBSS ad-hoc mode supported
Apr 2 23:47:16 aspire1300 kernel: eth1: WEP supported, 104-bit key
Apr 2 23:47:16 aspire1300 kernel: eth1: MAC address 00:09:5B:24:52:38
Apr 2 23:47:16 aspire1300 kernel: eth1: Station name "Prism I"
Apr 2 23:47:16 aspire1300 kernel: eth1: ready
Apr 2 23:47:16 aspire1300 kernel: eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
Apr 2 23:47:16 aspire1300 cardmgr[682]: executing: './network start eth1'
Apr 2 23:47:16 aspire1300 cardmgr[682]: + /sbin/ifup: interface eth1 already configured
The problem is the same with a 2.4.25 or a 2.6.3 kernel.
However, during the install stage, the network works fine (was able to download from debian server).
4. I need to install kernel-image-2.6.3-k7 in order to have cpufreq
(Not really a problem).
Reply to: