Bug#241145: Package: installation-reports
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 100MB Net Install include Base
uname -a:
Linux debian 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686 GNU/Linux
Date: 2004-03-30, 15:00 to 16:00
Method: NetInstall with 100 MB CD image, Expert mode.
Machine: Dell Optiplex GX1
Processor: PII 233 MHz
Memory: 448 MB
Root Device: <Maxtor IDE 75 GB>
Root Size/partition table:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda5 1052120 108928 943192 11% /
/dev/hda7 1052184 165500 886684 16% /var
/dev/hda8 1052184 32840 1019344 4% /tmp
/dev/hda9 5245016 1657924 3587092 32% /usr
/dev/hda10 5245016 33136 5211880 1% /usr/local
/dev/hda11 5245016 32840 5212176 1% /opt
/dev/hda12 5076320 53104 5023216 2% /home
/dev/hda2 25020468 32840 24987628 1% /storage1
/dev/hda3 25020468 32840 24987628 1% /storage2
Output of lspci:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 24)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c)
02:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
06)
02:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 06)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [0]
Configure network HW: [0]
Config network: [0]
Detect CD: [0]
Load installer modules: [0]
Detect hard drives: [0]
Partition hard drives: [0]
Create file systems: [0]
Mount partitions: [0]
Install base system: [0]
Install boot loader: [0]
Reboot: [0]
Comments/Problems:
I found the installer a bit harder to use than the installer from Woody,
particularly in the area of partitioning the hard drive and assigning
mount points. It took me some playing around to figure out exactly how
to assign mount points, in fact. Using "Expert" mode, I had hoped I
could simply use fdisk then assign mount points in a simple q/a after
that.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: