Bug#240221: Package: installation-reports
Package: installation-reports
Debian-installer-version: sarge-i386-netinst.iso
uname -a: 2.4.25-1-386
Date: march 26. 2004
Method: boot device cd-rom
Machine: VIA EPIA ME6000 (on board viedo, lan, sound)
Processor: VIA Samuel 2
----
cat /proc/cpuinfo
processor : 0
vendor_id : CentaurHauls
cpu family : 6
model : 7
model name : VIA Samuel 2
stepping : 3
cpu MHz : 599.914
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow
bogomips : 1196.03
----
Memory: 512MB
Root Device: IDE seagate barracuda (120GB)
Root:
----
Disk /dev/hda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 19457 156288321 5 Extended
/dev/hda5 1 61 489919+ 83 Linux
/dev/hda6 62 85 192748+ 82 Linux swap
/dev/hda7 86 328 1951866 83 Linux
/dev/hda8 329 450 979933+ 83 Linux
/dev/hda9 451 572 979933+ 83 Linux
/dev/hda10 573 645 586341 83 Linux
/dev/hda11 646 1861 9767488+ 83 Linux
/dev/hda12 1862 3077 9767488+ 83 Linux
/dev/hda13 3078 15202 97394031 83 Linux
/dev/hda14 15203 19457 34178256 83 Linux
----
/dev/hda6 none swap sw 0 0
/dev/hda11 / reiserfs defaults 0 1
----
Output of lspci:
----
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
00:14.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo
CLE266] integrated CastleRock graphics (rev 03)
----
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
langues and keymap:
i'am swiss (german speaking part). i choose Deutsch (Schweiz) keymap
Schweizerdeutsch (Swiss (German)).
btw: unusual translation we speak swiss german (Schweizerdeutsch) but we
write german, our keyboards are "Schweiz (Deutsch)" or "Schweiz
(Französisch)" equal keyboard but the configuration is different for
the keys [öé],[äà],[üè]:
in the german speaking part:
[öé]->ö and shift+[öe]->é
[äà]->ä ..
[üè]->ü ..
in the franch speaking part:
[öé]->é and shift+[öé]->ö
.
.
after the installation the special character didn't work (backslash,
umlaut).
i run dpkg-reconfigure console-data (choose keymap swiss german)
and dpkg-reconfigure locales (choose de_CH).
Reply to: