Bug#231405: installation-reports
Package: installation-reports
Debian-installer-version: 03-02-2004 (DD/MM/YY) Unstable Floppy
Images
uname -a: Linux (none) 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST
2003 i486 unkown
Date: 06-02-2004 (DD/MM/YY)
Method: <How did you install? What did you boot off? If
network
install, from where? Proxied?>
DI boot floppies. Used Boot/Root/Net Driver
Machine: Generic i486, 40MB RAM, IDE disks, Ne2000 ISA NIC
Processor: 486DX4/100
Memory: 40MB
Root Device: /dev/hda
Root Size/partition table: <Feel free to paste the full
partition
table, with notes on which partitions are mounted where.>
Output of lspci:
No PCI in this system
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [E]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try
it
Comments/Problems:
Need to load ne.o for ne2000 NIC. Standard install (not expert)
does not allow for the entry of module options as required for
this module (io=0x300, irq=10)
DI gives error "Error while running 'modprobe -v ne'"
Manual insmod of module (with options required) does work and
install can continue afterwards (not for a newb though).
==============================================
!! PSI Has New Telephone Numbers !! See below:
Craig Sampson
Professional Systems Integration Pty Ltd
Email: craig@psi-aus.com
New telephone/fax numbers:
Phone: (08) 9397 5612
Fax : (08) 9397 6031
Professional Systems Integration Pty Ltd
PO Box 231
Gosnells
WA 6110
==============================================
Reply to: