[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#228832: BETA2: Install Report

Package: installation-reports
Version: beta2


Debian-installer-version: beta 2
uname -a: Linux rmsbase 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 GNU/Linux
Date: --(Wed Jan 21 12:01:11 WIT 2004)
Method: CDROM from http://kambing.vlsm.org/debian-cd/3.1_netinst/
Machine: ASUS P4/533
Processor: P4/2GHz
Memory: 256
Root Device: IDE ---> /dev/hda5
Root Size/partition table: 

proc       /proc      proc	defaults		0	0
/dev/hdc2  none       swap	sw			0	0
/dev/hda3  none       swap	sw			0	0
/dev/hdb1  none       swap	sw			0	0
/dev/hda5  /          ext3	defaults,errors=remount-ro  0	1
/dev/hda4  /de2       ext3	defaults		0	2
/dev/cdrom /cdrom     iso9660	ro,user,noauto		0	0
/dev/hda6  /sid       auto	defaults		0	0
/dev/hda7  /knoppix   ext3	defaults		0	3
/dev/hda8  /morphix   ext3	defaults		0	3
/dev/hda1  /win98     vfat	defaults		0	3
/dev/hdb2  /var/work1 reiserfs	defaults		0	2
/dev/hdc3  /var/www   ext3	defaults		0	2
/dev/fd0   /floppy    auto	rw,user,noauto		0	0
/dev/hdd   /cdrom     auto	ro,user,noauto		0	0
/dev/sda   /usb       auto	rw,user,noauto		1	3
/dev/sda1  /mnt/usb1  auto	rw,user,noauto		1	3

Output of lspci:
00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15)
02:04.0 USB Controller: NEC Corporation USB (rev 41)
02:04.1 USB Controller: NEC Corporation USB (rev 41)
02:04.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
02:0a.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [ ]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

* First of all, it is not easy to figure out; to where to send
  this "report template". Please add an URL and or email contact
  address to that template.

* I have tested on two systems: one is using an ASUS P4/533 MB; 
  the other one is using an old ASUS P5A-B board (Pentium 166/MMX). 
  *** BOTH works OK! ****

  Note: the Pentium 166/MMX failed to boot the beta1 version

* Suggestions:
  There should be a mode between default and expert that asks if using:
  - DHCP or Static IP addresses

Rahmat M.  Samik-Ibrahim -- vLSM.org  -- http://rms46.vLSM.org/ --
Fetch my GNUPG public key at http://rms46.vlsm.org/pgp/pub.txt ---

Attachment: signature.asc
Description: This is a digitally signed message part

Reply to: