[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#227910: installation-reports: Dell Inspiron 8600



Package: installation-reports
Version: unavailable; reported 2004-01-15
Severity: normal

INSTALL REPORT

Debian-installer-version: http://gluck.debian.org/cdimage/testing/netinst/i386/keep_20040103/sarge-i386-businesscard.iso
uname -a: Linux pupp 2.4.23-1-686 #1 Sun Nov 30 20:51:10 EST 2003 i686 GNU/Linux
Date: Thu Jan 15 01:17:46 CET 2004
Method: CD-ROM, packages loaded from mirror.pudas.net

Machine: Dell Inspiron 8600
Processor: Pentium M
Memory: 512 Mb
Root Device: IDE

Root Size/partition table:
  Disk /dev/hda: 60.0 GB, 60011642880 bytes
  255 heads, 63 sectors/track, 7296 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes

     Device Boot      Start         End      Blocks   Id  System
  /dev/hda1   *           1        2432    19535008+   7  HPFS/NTFS
  /dev/hda2            2433        7296    39070080    5  Extended
  /dev/hda5            2433        7296    39070048+  83  Linux

Output of lspci:
  00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
  00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03)
  00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
  00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
  00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
  00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 01)
  00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81)
  00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
  00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 01)
  00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 01)
  00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 01)
  01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 031b (rev a1)
  02:00.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
  02:01.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
  02:01.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller
  02:03.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [E]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [E]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

o  There's no floppy on this system. The installer tried to load the
   floppy driver every time it loaded some kernel modules, reporting a
   failure each time.

o  The installer hung during some module probe. Using "expert" mode, I
   got it both during the network hardware detection stage and the
   generic "Detect hardware" stage. The computer hung hard; it was not
   possible to switch to the log console to see which module it failed
   on. (Using "aic7xxx=no_probe" as suggested for "certain DELL
   machines" didn't help.)

o  The next time I avoided the automatic network hardware detection
   and choose the driver b44 manually. Even though the driver loaded
   correctly, the installer displayed an error that no ethernet card
   was found. The installation continued correctly to the next stage,
   however.

o  I also tried to skip the generic "Detect hardware" stage by
   choosing the next one, but the installer started another kernel
   module load run anyway.

o  During a quick switch to the log console before the hang, I noticed
   that the last log message came from the pcmcia_core module. So
   after another reboot I loaded it manually, which worked fine. The
   "Detect hardware" stage didn't work after this, so I had to
   interrupt it with Ctrl-C (no hard hang this time - it just didn't
   progress). There were numerous messages about missing module
   dependencies in the log after that interruption.

   Afterwards it was still not possible to skip the module load run,
   but when I restarted it yet again, it got to the end with an error
   about that modules needed for my system weren't loaded. The
   installation continued fine anyway.

o  The list over network card drivers was not sorted alphabetically
   which made it more difficult than necessary to find my driver. This
   seems to be common for many lists in the installer. E.g. the one
   over keyboard layouts is _almost_ sorted but some entries are out
   of order (e.g. "Dutch" and "Brazilian").

o  In the Swedish translation, it says "Upptäck cd-rom", "Upptäck
   hårdvara" etc. I believe a better word in place of "Upptäck" is
   "Detektera".



Reply to: