Bug#227355: install report

[sylvain ferriol <sylvain.ferriol@imag.fr>]

Package: installation-reports


INSTALL REPORT

Debian-installer-version: 20040112 
http://people.debian.org/~sjogren/d-i/images/daily/
uname -a: 2-4-22-1-386
Date: 20040112
Method: netinst with floppies

Machine: IBM PC 300GL
Processor: pentium
Memory: 64Mo
Root Device: /dev/hda
Root Size/partition table: <Feel free to paste the full partition
     table, with notes on which partitions are mounted where.>
Output of lspci:

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [E]
Config network:         [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

1. for french translators:
when i install network modules, the message displayed is 
'chargez les modules présents sur la disquette maintenant' 
but the floppy in the device is floppy-image.img, not net-drivers-image.img
so it's better to say: 'chargez les modules présents sur une autre disquette' for example

2. list of network modules is in reverse order

3. i have to call 3 times 'detect network hardware' to have the panel to enable me to enter options for network modules
the first time, it detects nothing (i have a dlink 220e and a cs89x0 card)
the second time , it rery again, nothing is detected by i have a red screen error with 'modprobe -v ide-cd'
and the third time, i can config ne module but 'Ethenet card not found' (but i use the same options in woody and it works!)

4. when i want to rechange the language (to see for example, the translation in en_US), just after, it call 
hardware detection or 'configure the network', it depends on the position in the installation process.

5.when i select 'load drivers from a floppy', it access directly on the device with no message 
like 'install the floppy and press enter' for example

6. unable to go back in 'configure the network panel'


sylvain