Re: Laptop: system hangs
Dale Amon wrote:
On Tue, Sep 02, 2003 at 11:44:15AM +0200, Matthias P. Wuerfl wrote:
Knoppix (2003-07-26-BETA) starts fine. Where can i see what it has
detected?
You can su to root in an xterm. Password is null. Also, you can go to
virtual console vt1 and see the results of the boot up discovery.
OK. Su to root is no problem. What i meant was "what do i have to type
to get information about what was detected during startup?". What i need
is the linux-translation of "Hey Knoppix, what did you detect?". I
thougt of "cat /var/log/boot" or "var/log/hardware-detect", but there's
no such file. I'll c&p /var/log/messages for it has been useful in other
cases :-).
Additional Informations:
- In the meantime i have installed Knoppix to my hd.
- X works fine but but the "CTRL-ALT-1"[*] shows only blank screen
- Tried to install Windows again to gather hardware information. This is
not really possible because installation has to be done "blind" because
screen shows only trash.
- idea: this laptop seems to have a problem with other screen
resolutions than 1024x7xx.
[*] whats the name of it? CLI? tty?
/var/log/messages follows:
Sep 2 12:21:35 barney syslogd 1.4.1#10: restart.
Sep 2 12:21:35 barney kernel: klogd 1.4.1#10, log source = /proc/kmsg
started.
Sep 2 12:21:36 barney kernel: Inspecting /boot/System.map-2.4.21-xfs
Sep 2 12:21:36 barney kernel: Loaded 18123 symbols from
/boot/System.map-2.4.21-xfs.
Sep 2 12:21:36 barney kernel: Symbols match kernel version 2.4.21.
Sep 2 12:21:36 barney kernel: Loaded 336 symbols from 25 modules.
Sep 2 12:21:36 barney kernel: Linux version 2.4.21-xfs (root@Knoppix)
(gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Fre Jul 25
00:06:47 CEST 2003
Sep 2 12:21:36 barney kernel: BIOS-provided physical RAM map:
Sep 2 12:21:36 barney kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Sep 2 12:21:36 barney kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Sep 2 12:21:36 barney kernel: BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
Sep 2 12:21:36 barney kernel: BIOS-e820: 0000000000100000 -
00000000077f0000 (usable)
Sep 2 12:21:36 barney kernel: BIOS-e820: 00000000077f0000 -
00000000077fffc0 (ACPI data)
Sep 2 12:21:36 barney kernel: BIOS-e820: 00000000077fffc0 -
0000000007800000 (ACPI NVS)
Sep 2 12:21:36 barney kernel: BIOS-e820: 00000000fffc0000 -
0000000100000000 (reserved)
Sep 2 12:21:36 barney kernel: 119MB LOWMEM available.
Sep 2 12:21:36 barney kernel: On node 0 totalpages: 30704
Sep 2 12:21:36 barney kernel: zone(0): 4096 pages.
Sep 2 12:21:36 barney kernel: zone(1): 26608 pages.
Sep 2 12:21:36 barney kernel: zone(2): 0 pages.
Sep 2 12:21:36 barney kernel: Kernel command line: BOOT_IMAGE=Linux ro
root=303 hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi
hdh=scsi apm=power-off nomce
Sep 2 12:21:36 barney kernel: ide_setup: hda=scsi
Sep 2 12:21:36 barney kernel: ide_setup: hdb=scsi
Sep 2 12:21:36 barney kernel: ide_setup: hdc=scsi
Sep 2 12:21:36 barney kernel: ide_setup: hdd=scsi
Sep 2 12:21:36 barney kernel: ide_setup: hde=scsi
Sep 2 12:21:36 barney kernel: ide_setup: hdf=scsi
Sep 2 12:21:36 barney kernel: ide_setup: hdg=scsi
Sep 2 12:21:36 barney kernel: ide_setup: hdh=scsi
Sep 2 12:21:36 barney kernel: Local APIC disabled by BIOS -- reenabling.
Sep 2 12:21:36 barney kernel: Found and enabled local APIC!
Sep 2 12:21:36 barney kernel: Initializing CPU#0
Sep 2 12:21:36 barney kernel: Detected 701.598 MHz processor.
Sep 2 12:21:36 barney kernel: Console: colour dummy device 80x25
Sep 2 12:21:36 barney kernel: Calibrating delay loop... 1399.19 BogoMIPS
Sep 2 12:21:36 barney kernel: Memory: 118556k/122816k available (1258k
kernel code, 3872k reserved, 531k data, 132k init, 0k highmem)
Sep 2 12:21:36 barney kernel: Dentry cache hash table entries: 16384
(order: 5, 131072 bytes)
Sep 2 12:21:36 barney kernel: Inode cache hash table entries: 8192
(order: 4, 65536 bytes)
Sep 2 12:21:36 barney kernel: Mount cache hash table entries: 512
(order: 0, 4096 bytes)
Sep 2 12:21:36 barney kernel: Buffer-cache hash table entries: 4096
(order: 2, 16384 bytes)
Sep 2 12:21:36 barney kernel: Page-cache hash table entries: 32768
(order: 5, 131072 bytes)
Sep 2 12:21:36 barney kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Sep 2 12:21:36 barney kernel: CPU: L2 cache: 256K
Sep 2 12:21:36 barney kernel: CPU serial number disabled.
Sep 2 12:21:36 barney kernel: Enabling fast FPU save and restore... done.
Sep 2 12:21:36 barney kernel: Enabling unmasked SIMD FPU exception
support... done.
Sep 2 12:21:36 barney kernel: Checking 'hlt' instruction... OK.
Sep 2 12:21:36 barney kernel: Checking for popad bug... OK.
Sep 2 12:21:36 barney kernel: POSIX conformance testing by UNIFIX
Sep 2 12:21:36 barney kernel: mtrr: v1.40 (20010327) Richard Gooch
(rgooch@atnf.csiro.au)
Sep 2 12:21:36 barney kernel: mtrr: detected mtrr type: Intel
Sep 2 12:21:36 barney kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Sep 2 12:21:36 barney kernel: CPU: L2 cache: 256K
Sep 2 12:21:36 barney kernel: CPU0: Intel Pentium III (Coppermine)
stepping 03
Sep 2 12:21:36 barney kernel: per-CPU timeslice cutoff: 731.88 usecs.
Sep 2 12:21:36 barney kernel: SMP motherboard not detected.
Sep 2 12:21:36 barney kernel: enabled ExtINT on CPU#0
Sep 2 12:21:36 barney kernel: ESR value before enabling vector: 00000000
Sep 2 12:21:36 barney kernel: ESR value after enabling vector: 00000000
Sep 2 12:21:36 barney kernel: Using local APIC timer interrupts.
Sep 2 12:21:36 barney kernel: calibrating APIC timer ...
Sep 2 12:21:36 barney kernel: ..... CPU clock speed is 701.5813 MHz.
Sep 2 12:21:36 barney kernel: ..... host bus clock speed is 100.2259 MHz.
Sep 2 12:21:36 barney kernel: cpu: 0, clocks: 1002259, slice: 501129
Sep 2 12:21:36 barney kernel:
CPU0<T0:1002256,T1:501120,D:7,S:501129,C:1002259>
Sep 2 12:21:36 barney kernel: Waiting on wait_init_idle (map = 0x0)
Sep 2 12:21:36 barney kernel: All processors have done init_idle
Sep 2 12:21:36 barney kernel: PCI: PCI BIOS revision 2.10 entry at
0xeb3d0, last bus=1
Sep 2 12:21:36 barney kernel: PCI: Using configuration type 1
Sep 2 12:21:36 barney kernel: PCI: Probing PCI hardware
Sep 2 12:21:36 barney kernel: PCI: Using IRQ router SIS [1039/0008] at
00:01.0
Sep 2 12:21:36 barney kernel: isapnp: Scanning for PnP cards...
Sep 2 12:21:36 barney kernel: isapnp: No Plug & Play device found
Sep 2 12:21:36 barney kernel: Linux NET4.0 for Linux 2.4
Sep 2 12:21:36 barney kernel: Based upon Swansea University Computer
Society NET3.039
Sep 2 12:21:36 barney kernel: Initializing RT netlink socket
Sep 2 12:21:36 barney kernel: Starting kswapd
Sep 2 12:21:36 barney kernel: VFS: Disk quotas vdquot_6.5.1
Sep 2 12:21:36 barney kernel: vesafb: framebuffer at 0x40000000, mapped
to 0xc800d000, size 12288k
Sep 2 12:21:36 barney kernel: vesafb: mode is 1024x768x16,
linelength=2048, pages=4
Sep 2 12:21:36 barney kernel: vesafb: protected mode interface info at
c845:0004
Sep 2 12:21:36 barney kernel: vesafb: scrolling: redraw
Sep 2 12:21:36 barney kernel: vesafb: directcolor: size=0:5:6:5,
shift=0:11:5:0
Sep 2 12:21:36 barney kernel: Console: switching to colour frame buffer
device 128x48
Sep 2 12:21:36 barney kernel: fb0: VESA VGA frame buffer device
Sep 2 12:21:36 barney kernel: pty: 256 Unix98 ptys configured
Sep 2 12:21:36 barney kernel: Floppy drive(s): fd0 is 1.44M
Sep 2 12:21:36 barney kernel: FDC 0 is a post-1991 82077
Sep 2 12:21:36 barney kernel: RAMDISK driver initialized: 16 RAM disks
of 4096K size 1024 blocksize
Sep 2 12:21:36 barney kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00beta4-2.4
Sep 2 12:21:36 barney kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Sep 2 12:21:36 barney kernel: SIS5513: IDE controller at PCI slot 00:00.1
Sep 2 12:21:36 barney kernel: SIS5513: chipset revision 208
Sep 2 12:21:36 barney kernel: SIS5513: not 100%% native mode: will
probe irqs later
Sep 2 12:21:36 barney kernel: SiS630 ATA 66 controller
Sep 2 12:21:36 barney kernel: ide0: BM-DMA at 0x1100-0x1107, BIOS
settings: hda:DMA, hdb:pio
Sep 2 12:21:36 barney kernel: ide1: BM-DMA at 0x1108-0x110f, BIOS
settings: hdc:DMA, hdd:pio
Sep 2 12:21:36 barney kernel: hda: HITACHI_DK23AA-12, ATA DISK drive
Sep 2 12:21:36 barney kernel: hdc: SR242S, ATAPI CD/DVD-ROM drive
Sep 2 12:21:36 barney kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 2 12:21:36 barney kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep 2 12:21:36 barney kernel: hda: attached ide-disk driver.
Sep 2 12:21:36 barney kernel: hda: host protected area => 1
Sep 2 12:21:36 barney kernel: hda: 23579136 sectors (12073 MB) w/512KiB
Cache, CHS=1467/255/63
Sep 2 12:21:36 barney kernel: ide-cd: passing drive hdc to ide-scsi
emulation.
Sep 2 12:21:36 barney kernel: hdc: attached ide-scsi driver.
Sep 2 12:21:36 barney kernel: Partition check:
Sep 2 12:21:36 barney kernel: hda: hda1 hda2 hda3
Sep 2 12:21:36 barney kernel: Highpoint HPT370 Softwareraid driver for
linux version 0.01-ww1
Sep 2 12:21:36 barney kernel: No raid array found
Sep 2 12:21:36 barney last message repeated 2 times
Sep 2 12:21:36 barney kernel: Guestimating sector 23578111 for superblock
Sep 2 12:21:36 barney kernel: SCSI subsystem driver Revision: 1.00
Sep 2 12:21:36 barney kernel: scsi0 : SCSI host adapter emulation for
IDE ATAPI devices
Sep 2 12:21:36 barney kernel: Vendor: MITSUMI Model: CD-ROM SR242S
!A Rev: z03
Sep 2 12:21:36 barney kernel: Type:
CD-ROM ANSI SCSI revision: 02
Sep 2 12:21:36 barney kernel: Attached scsi CD-ROM sr0 at scsi0,
channel 0, id 0, lun 0
Sep 2 12:21:36 barney kernel: sr0: scsi3-mmc drive: 24x/24x cd/rw
xa/form2 cdda tray
Sep 2 12:21:36 barney kernel: Uniform CD-ROM driver Revision: 3.12
Sep 2 12:21:36 barney kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Sep 2 12:21:36 barney kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Sep 2 12:21:36 barney kernel: IP: routing cache hash table of 512
buckets, 4Kbytes
Sep 2 12:21:36 barney kernel: TCP: Hash tables configured (established
8192 bind 8192)
Sep 2 12:21:36 barney kernel: NET4: Unix domain sockets 1.0/SMP for
Linux NET4.0.
Sep 2 12:21:36 barney kernel: RAMDISK: Compressed image found at block 0
Sep 2 12:21:36 barney kernel: Freeing initrd memory: 143k freed
Sep 2 12:21:36 barney kernel: VFS: Mounted root (ext2 filesystem).
Sep 2 12:21:36 barney kernel: Journalled Block Device driver loaded
Sep 2 12:21:36 barney kernel: kjournald starting. Commit interval 5
seconds
Sep 2 12:21:36 barney kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,3), internal journal
Sep 2 12:21:36 barney kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Sep 2 12:21:36 barney kernel: Freeing unused kernel memory: 132k freed
Sep 2 12:21:36 barney kernel: Adding Swap: 248996k swap-space (priority -1)
Sep 2 12:21:36 barney kernel: Adding Swap: 530104k swap-space (priority -2)
Sep 2 12:21:36 barney kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,3), internal journal
Sep 2 12:21:36 barney kernel: Real Time Clock Driver v1.10e
Sep 2 12:21:36 barney kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.16)
Sep 2 12:21:36 barney kernel: Linux Kernel Card Services 3.1.22
Sep 2 12:21:36 barney kernel: options: [pci] [cardbus] [pm]
Sep 2 12:21:36 barney kernel: PCI: Assigned IRQ 11 for device 00:0a.0
Sep 2 12:21:36 barney kernel: Yenta IRQ list 0098, PCI irq11
Sep 2 12:21:36 barney kernel: Socket status: 30000007
Sep 2 12:21:36 barney kernel: usb.c: registered new driver usbdevfs
Sep 2 12:21:36 barney kernel: usb.c: registered new driver hub
Sep 2 12:21:36 barney kernel: PCI: Found IRQ 10 for device 00:01.2
Sep 2 12:21:36 barney kernel: PCI: Sharing IRQ 10 with 00:01.3
Sep 2 12:21:36 barney kernel: usb-ohci.c: USB OHCI at membase
0xc8cbf000, IRQ 10
Sep 2 12:21:36 barney kernel: usb-ohci.c: usb-00:01.2, Silicon
Integrated Systems [SiS] 7001
Sep 2 12:21:36 barney kernel: usb.c: new USB bus registered, assigned
bus number 1
Sep 2 12:21:36 barney kernel: hub.c: USB hub found
Sep 2 12:21:36 barney kernel: hub.c: 3 ports detected
Sep 2 12:21:36 barney kernel: PCI: Found IRQ 10 for device 00:01.3
Sep 2 12:21:36 barney kernel: PCI: Sharing IRQ 10 with 00:01.2
Sep 2 12:21:36 barney kernel: usb-ohci.c: USB OHCI at membase
0xc8cc1000, IRQ 10
Sep 2 12:21:36 barney kernel: usb-ohci.c: usb-00:01.3, Silicon
Integrated Systems [SiS] 7001 (#2)
Sep 2 12:21:36 barney kernel: usb.c: new USB bus registered, assigned
bus number 2
Sep 2 12:21:36 barney kernel: hub.c: USB hub found
Sep 2 12:21:36 barney kernel: hub.c: 2 ports detected
Sep 2 12:21:36 barney kernel: mice: PS/2 mouse device common for all mice
Sep 2 12:21:36 barney kernel: usb.c: registered new driver hiddev
Sep 2 12:21:36 barney kernel: usb.c: registered new driver hid
Sep 2 12:21:36 barney kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech
Pavlik <vojtech@suse.cz>
Sep 2 12:21:36 barney kernel: hid-core.c: USB HID support drivers
Sep 2 12:21:36 barney kernel: Serial driver version 5.05c (2001-07-08)
with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Sep 2 12:21:36 barney kernel: PCI: Found IRQ 5 for device 00:01.6
Sep 2 12:21:36 barney kernel: PCI: Sharing IRQ 5 with 00:01.4
Sep 2 12:21:36 barney kernel: hub.c: new USB device 00:01.2-1, assigned
address 2
Sep 2 12:21:36 barney kernel: input0: USB HID v1.00 Mouse [Microsoft
Microsoft IntelliMouse® Explorer] on usb1:2.0
Sep 2 12:21:36 barney kernel: sis900.c: v1.08.06 9/24/2002
Sep 2 12:21:36 barney kernel: PCI: Found IRQ 11 for device 00:01.1
Sep 2 12:21:36 barney kernel: eth0: SiS 900 Internal MII PHY
transceiver found at address 1.
Sep 2 12:21:36 barney kernel: eth0: Using transceiver found at address
1 as default
Sep 2 12:21:36 barney kernel: eth0: SiS 900 PCI Fast Ethernet at
0x3000, IRQ 11, 00:02:8d:00:11:46.
Sep 2 12:21:36 barney kernel: Trident 4DWave/SiS 7018/ALi 5451,Tvia
CyberPro 5050 PCI Audio, version 0.14.10h, 00:19:37 Jul 25 2003
Sep 2 12:21:36 barney kernel: PCI: Found IRQ 5 for device 00:01.4
Sep 2 12:21:36 barney kernel: PCI: Sharing IRQ 5 with 00:01.6
Sep 2 12:21:36 barney kernel: trident: SiS 7018 PCI Audio found at IO
0x3100, IRQ 5
Sep 2 12:21:36 barney kernel: ac97_codec: AC97 Audio codec, id:
0x8384:0x7609 (SigmaTel STAC9721/23)
Sep 2 12:21:36 barney kernel: ac97_codec: AC97 Modem codec, id: SIL34
(Silicon Laboratory Si3036)
Sep 2 12:21:36 barney kernel: Linux agpgart interface v0.99 (c) Jeff
Hartmann
Sep 2 12:21:36 barney kernel: agpgart: Maximum main memory to use for
agp memory: 86M
Sep 2 12:21:36 barney kernel: agpgart: Detected SiS 630 chipset
Sep 2 12:21:36 barney kernel: agpgart: AGP aperture is 64M @ 0x30000000
Sep 2 12:21:36 barney kernel: NTFS driver v1.1.22 [Flags: R/W MODULE]
Sep 2 12:21:36 barney kernel: ttyS0: LSR safety check engaged!
Sep 2 12:21:36 barney kernel: ttyS0: LSR safety check engaged!
Sep 2 12:21:36 barney kernel: ttyS1: LSR safety check engaged!
Sep 2 12:21:36 barney kernel: ttyS1: LSR safety check engaged!
Sep 2 12:21:36 barney kernel: eth0: Media Link On 100mbps full-duplex
Sep 2 12:21:36 barney kernel: eth0: Media Link On 100mbps full-duplex
Sep 2 12:21:36 barney kernel: blk: queue c03319e0, I/O limit 4095Mb
(mask 0xffffffff)
Sep 2 12:21:36 barney kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Sep 2 12:21:36 barney kernel: cs: IO port probe 0x0820-0x08ff: clean.
Sep 2 12:21:36 barney kernel: cs: IO port probe 0x0800-0x080f: clean.
Sep 2 12:21:36 barney kernel: cs: IO port probe 0x0100-0x04ff:
excluding 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
Sep 2 12:21:36 barney kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Sep 2 12:21:48 barney kernel: parport0: PC-style at 0x378 [PCSPP,EPP]
Sep 2 12:21:48 barney kernel: lp0: using parport0 (polling).
Sep 2 12:21:48 barney kernel: lp0: console ready
Sep 2 12:21:48 barney kernel: ttyS0: LSR safety check engaged!
Sep 2 12:21:48 barney kernel: ttyS1: LSR safety check engaged!
Sep 2 12:21:53 barney kernel: Warning: Remapping obsolete /dev/fb*
minor 32 to 1
Sep 2 12:21:53 barney kernel: Warning: Remapping obsolete /dev/fb*
minor 64 to 2
Sep 2 12:21:53 barney kernel: Warning: Remapping obsolete /dev/fb*
minor 96 to 3
Sep 2 12:21:53 barney kernel: Warning: Remapping obsolete /dev/fb*
minor 128 to 4
Sep 2 12:21:54 barney kernel: Warning: Remapping obsolete /dev/fb*
minor 160 to 5
Sep 2 12:21:54 barney kernel: Warning: Remapping obsolete /dev/fb*
minor 192 to 6
Sep 2 12:21:54 barney kernel: Warning: Remapping obsolete /dev/fb*
minor 224 to 7
Sep 2 12:41:35 barney -- MARK --
Thanks for your help,
Gruesse, Matthias
Reply to: