[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: IBM XSeries x360: IPS-Modul



Hi,

* Eduard Bloch <edi@gmx.de> [2003-05-15 19:14]:
> Sollte dein Kontroller ein lsi-megaraid u320-1 oder neuer sein, wird es
> u.U. nicht funktionieren - ich warte immer noch auf jemanden, der mir
> die Quelle von neurer Module-Version nennt, damit diese auf die
> genannte Diskette kommt.

I hope the following informations will help you:

sar@blackhole:/boot$ uname -a
Linux blackhole 2.4.20-xfs #1 SMP Die Mai 13 14:37:51 CEST 2003 i686 unknown

sar@blackhole:~$ lspci -v -s 01:01.0
01:01.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c1030 (rev 07)
	Subsystem: IBM: Unknown device 026d
	Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 22
	I/O ports at 2300 [size=256]
	Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
	Memory at fbfe0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <unassigned> [disabled] [size=1M]
	Capabilities: <available only to root>


sar@blackhole:~$ dmesg | more
[...]
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Fusion MPT base driver 2.02.01
Copyright (c) 1999-2002 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
mptbase: 1 MPT adapter found, 1 installed.
Fusion MPT SCSI Host driver 2.02.01
scsi0 : ioc0: LSI53C1030, FwRev=01000e00h, Ports=1, MaxQ=222, IRQ=22
  Vendor: LSILOGIC  Model: 1030 IM           Rev: 1000
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: IBM       Model: 25P3495a S320  1  Rev: 1
  Type:   Processor                          ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 35385345 512-byte hdwr sectors (18117 MB)
Partition check:
  /dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
[...]


sar@blackhole:/boot$ cat config-2.4.20-xfs
[...]
#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
[...]

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_BOOT=y
CONFIG_FUSION_ISENSE=m
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_NET_FC=y
[...]


Please contact me for further informations!
It would be really coole, if this will be included in the next version
of b-f. :)

Bye
Thorsten


-- 
Thorsten Sauter
<tsauter@gmx.net>

				(Is there life after /sbin/halt -p?)

Attachment: pgp2RlmvGS3hf.pgp
Description: PGP signature


Reply to: