[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#129479: scsi disk not detected

Michael Schmitz wrote:

> > > I did it, but didn' work. It can'f find the device.
> >
> > Well, certainly, you do not have a scsi disk that mac-fdisk can
> > find. Is it by chance a pc-formatted scsi? mac-fdisk would try to read
> > the partition table at the beginning of the disk, which is an Apple
> > format.
> Did we get any information out of him regarding the kernel version and
> devfs support? We need the output of cat /proc/partitions to be specific.
> If there's nothing shown by cat /proc/partitions (in the interactive
> shell) the disk really isn't found by the SCSI controller (some disks seem
> to behave funny at SCSI ID 0 on MESH). The relevant section of the dmesg
> log (on console #4) should tell.
>         Michael

The kernel version is 2.2.19, and the command 'cat /proc/partitions' is

# cat /proc/partitions
major    minor    #blocks    name


And the part of dmesg concerning scsi is the following:

fd0 : SWIM3 floppy controller
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi0 : MESH
scsi1 : 53C94
scsi : 2 hosts
mesh : target aborted
mesh : target 3 synchronous at 50 Mb/s
    vendor : MATSHITA Model : CD-ROM ...
    Type : CD-ROM ...
Detected scsi CD-ROM sr0 at scsi 0, channel 0, id 3, lun 0
scsi : detected 1 SCSI generic 1 SCSI cdrom total
Uniform CD-ROM driver Revision : 3.11

Best regards,

Manuel Quesada

Reply to: