Installing Debian with DTP Raid 5 controler ?
Newbie to debian, but not to linux,
I want (in order to be "full" GPL) to install debian on a server.
The SCSI RAID controler I use (DPT, module dpt_io.o) is not recognized.
how can I do a custom set of resuce/boot/disk in order to install debian
on my system.
All is working fine with RedHat and 2.2.16 kernel (DPT sent me the
kernel patch to add the SCSI controler drivers). I hae the source for
the driver, but I don't succeed to do a good rescue/boot pair of disk to
make it work with debian.
My system is working fine with RedHat. I want to replace red hat by
debian
Step by step I did the following :
1) copy the working kernel image on the rescue disk (compact flavor)
2) make a modules.tgz from /lib/modules/2.2.16, coyp it to the rescue
disk
3)on the rescue disk : rdev.sh
4)reboot on the rescue disk, type enter at the prompt, inserting the
boot disk when asked
my scsi controler is not found and I can't follow the install process.
moreover my ethernet card is not seen neither (via-rhine.o module, a
D-Link 100 Mhz etehrnet card - works like a charm with red hat install)
If someone could help me to find a correct way to install debian on my
system, I'll be very pleased :)
begin:vcard
n:Conduché;Christophe
tel;cell:06 61 98 31 67
tel;fax:+33 (0)5.65.35.04.06
tel;work:+33 (0)5.65.35.04.04
x-mozilla-html:FALSE
url:http://www.apm-online.com
org:APM-Online
adr:;;125, rue Maréchal Foch;Cahors;;46000;France
version:2.1
email;internet:cconduche@apm-online.com
title:Directeur Associé
x-mozilla-cpt:;-16608
fn:Christophe Conduché
end:vcard
Reply to: