Re: Pine64 RockPro64 Support
Am 17.06.20 um 18:53 schrieb Marcin Juszkiewicz:
W dniu 16.06.2020 o 22:34, Marcin Juszkiewicz pisze:
W dniu 16.06.2020 o 21:33, Alexandre GRIVEAUX pisze:
I've try to boot and install the Pine64 RockPro64 with daily sdcard
image[0].
Unfortunaly i've got errors (see attachement), it's due to using
sdcard instead of eMMC ?
I use own build of U-Boot (from master branch) stored in SPI flash.
Bullseye boots without problem. So maybe try to upgrade U-Boot?
Wrote few words on updating U-Boot:
https://marcin.juszkiewicz.com.pl/2020/06/17/ebbr-on-rockpro64/
Hello,
first my english isn't good. So, sry for this.
I am using debian bullseye installer and install debian to an PCIe NVMe
SSD on my ROCKPro64. Very nice ;)
But after i complete this installation won't boot. I am using an u-boot
from ayufan. (2020.01..)
So i am copied from an ayufan debian minimal installation. (partition
linux-boot)
dtbs
efi
extlinux
Then i modified extlinux/extlinux.conf
timeout 10
menu title select kernel
label kernel-5.6.0-1137-ayufan-ge57f05e7bf8f
kernel /vmlinuz-5.6.0-2-arm64
initrd /initrd.img-5.6.0-2-arm64
devicetreedir /dtbs/5.6.0-1137-ayufan-ge57f05e7bf8f
append rw panic=10 init=/sbin/init coherent_pool=1M
ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#}
cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapa>
Now Debian Bullseye booted fine from my ROCKPro64 :)
Is it supposed to work like this?
Or can we add the missing things?
Thank you for your work. Now i have an nice debian on my ROCKPro64.
I wrote about what i have done on my private forum (only in german)
https://forum.frank-mankel.org/topic/831/rockpro64-debian-bullseye
Greetings
Frank
Reply to: