Pine64 RockPro64 Support
Hello,
I've try to boot and install the Pine64 RockPro64 with daily sdcard image[0].
Unfortunaly i've got errors (see attachement), it's due to using sdcard instead of eMMC ?
I'dont remember if i was registered on debian-arm, please send me a copie.
Thanks.
[0] https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-card-images/
U-Boot 2020.04+dfsg-2 (Apr 21 2020 - 02:34:37 +0000)
SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 RockPro64
DRAM: 3.9 GiB
PMIC: RK808
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Pine64 RockPro64
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
144 bytes read in 6 ms (23.4 KiB/s)
1: Debian-Installer
Retrieving file: /initrd.gz
29178820 bytes read in 87 ms (319.9 MiB/s)
Retrieving file: /vmlinuz
21413744 bytes read in 110 ms (185.7 MiB/s)
Retrieving file: /dtbs/rockchip/rk3399-rockpro64.dtb
56027 bytes read in 14 ms (3.8 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to f434c000, end f5f1fbc4 ... OK
Loading Device Tree to 00000000f433b000, end 00000000f434bada ... OK
Starting kernel ...
"Synchronous Abort" handler, esr 0x02000000
elr: ffffffff0b0d3000 lr : 0000000000202330 (reloc)
elr: 0000000002e10000 lr : 00000000f7f3f330
x0 : 00000000f433b000 x1 : 0000000000000000
x2 : 0000000000000000 x3 : 0000000000000000
x4 : 0000000002080000 x5 : 0000000000000001
x6 : 0000000000000008 x7 : 0000000000000000
x8 : 00000000f5f20b48 x9 : 0000000000000002
x10: 000000000a200023 x11: 0000000000000002
x12: 0000000000000002 x13: 00000000f5f34e06
x14: 00000000f433b000 x15: 00000000f7f3ea48
x16: 00000000f7f6c688 x17: 0000000000000000
x18: 00000000f5f34df0 x19: 00000000f7fd4f58
x20: 0000000000000000 x21: 0000000000000400
x22: 0000000000000003 x23: 00000000f5f20dc8
x24: 00000000f5f20dc8 x25: 00000000f7fc4080
x26: 0000000000000000 x27: 00000000f7f3f358
x28: 00000000f7fbb55d x29: 00000000f5f20b80
Code: ffffbfff feffffff ffffffff ffffffff (f6ffffff)
Resetting CPU ...
resetting ...
U-Boot TPL 2020.04+dfsg-2 (Apr 21 2020 - 02:34:37)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.04+dfsg-2 (Apr 21 2020 - 02:34:37 +0000)
Trying to boot from MMC1
U-Boot 2020.04+dfsg-2 (Apr 21 2020 - 02:34:37 +0000)
SoC: Rockchip rk3399
Reset cause: RST
Model: Pine64 RockPro64
DRAM: 3.9 GiB
PMIC: RK808
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Pine64 RockPro64
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
144 bytes read in 6 ms (23.4 KiB/s)
1: Debian-Installer
Retrieving file: /initrd.gz
MMC: block number 0x100008527 exceeds max(0x1cda000)
MMC: block number 0xf10cb1f exceeds max(0x1cda000)
Error reading cluster
** Unable to read file /initrd.gz **
Skipping l0 for failure retrieving initrd
SCRIPT FAILED: continuing...
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3c0000: USB EHCI 1.00
Bus dwc3: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus dwc3: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Device 0: unknown device
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
missing environment variable: pxeuuid
Retrieving file: /extlinux/pxelinux.cfg/01-42-37-bd-d6-1f-d3
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/00000000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/0000000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/000000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/00000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/0000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/00
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/0
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/default-arm-rk3399-rockpro64_rk3399
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/default-arm-rk3399
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/default-arm
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Retrieving file: /extlinux/pxelinux.cfg/default
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
Config file not found
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY ethernet@fe300000
=>
Reply to: