[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Pine64 RockPro64 Support

Am 17.06.20 um 18:53 schrieb Marcin Juszkiewicz:
W dniu 16.06.2020 o 22:34, Marcin Juszkiewicz pisze:
W dniu 16.06.2020 o 21:33, Alexandre GRIVEAUX pisze:

I've try to boot and install the Pine64 RockPro64 with daily sdcard

Unfortunaly i've got errors (see attachement), it's due to using
sdcard instead of eMMC ?
I use own build of U-Boot (from master branch) stored in SPI flash.

Bullseye boots without problem. So maybe try to upgrade U-Boot?

Wrote few words on updating U-Boot:



first my english isn't good. So, sry for this.

I am using debian bullseye installer and install debian to an PCIe NVMe SSD on my ROCKPro64. Very nice ;)

But after i complete this installation won't boot. I am using an u-boot from ayufan. (2020.01..)

So i am copied from an ayufan debian minimal installation. (partition linux-boot)




Then i modified extlinux/extlinux.conf

timeout 10
menu title select kernel

label kernel-5.6.0-1137-ayufan-ge57f05e7bf8f
    kernel /vmlinuz-5.6.0-2-arm64
    initrd /initrd.img-5.6.0-2-arm64
    devicetreedir /dtbs/5.6.0-1137-ayufan-ge57f05e7bf8f
    append rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapa>

Now Debian Bullseye booted fine from my ROCKPro64 :)

Is it supposed to work like this?

Or can we add the missing things?

Thank you for your work. Now i have an nice debian on my ROCKPro64.

I wrote about what i have done on my private forum (only in german)




Reply to: