Re: Debian on Seagate Personal Cloud and Seagate NAS
Were you ever able to get past the loading issue? I'm having the same problem.
On Monday, May 7, 2018 at 8:20:02 AM UTC-4, Jorge Gustavo Rocha wrote:
> Hi Martin,
>
> Thanks for the feedback.
> It would be great if Simon could test the installation with the most
> recent version of the installer. I can't boot the installer.
>
> Regarding clunc issues, I found out the netcat behavior has changed for
> some reason. I've tried with current netcat version, and clunc fails,
> because the call to netcat fails.
>
> So, with recent versions of netcat-openbsd, clunc fails with this error:
>
> nc -u -p 6666 192.168.1.103 6666
> usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
> [-m minttl] [-O length] [-P proxy_username] [-p source_port]
> [-q seconds] [-s source] [-T keyword] [-V rtable] [-W recvlimit]
> [-w timeout]
> [-X proxy_protocol] [-x proxy_address[:port]] [destination]
> [port]
>
> The work around is to use the package netcat-traditional and edit clunc
> to replace the call to nc with nc.traditional. The call will be:
> nc.traditional -u -p 6666 192.168.1.103 6666
>
> Both netcat-openbsd and netcat-traditional can coexist.
>
> Regards,
>
> Gustavo
>
> Às 12:09 de 07/05/2018, Martin Michlmayr escreveu:
> > * Jorge Gustavo Rocha <jgr@geomaster.pt> [2018-05-06 00:56]:
> >> I've followed the available instructions on:
> >> https://wiki.debian.org/InstallingDebianOn/Seagate/PersonalCloud
> >>
> >> 1) The tftp server is running and I'm able to get the files
> >> 2) I can access the U-Boot console with clunc and run the commands:
> > ...
> >> But after the message:
> >> Starting kernel ...
> >> nothing more happens. I can't connect with ssh. I can't ping to the
> >
> > So this happens when you try to boot the installer?
> >
> > I'm not aware of any problems with that but I haven't tested it in a
> > while (and don't have hardware right now). Simon, can you test if
> > https://wiki.debian.org/InstallingDebianOn/Seagate/PersonalCloud
> > works for you on the Personal Cloud?
> >
> >> How can I check what is going wrong? Is there any log file where to look
> >> for errors?
> >
> > Not at this point, I don't think so.
> >
> >> Can I run netconsole or something similar to see what is going on?
> >
> > That's not built into the kernel iirc.
> >
> > I assume you can still connect to u-boot with clunc, right?
> >
> > We have received some reports from users that they could no longer
> > connect to u-boot with clunc after installing Debian. Simon Guinot
> > (the Seagate NAS expert) investigated this issue quite a bit and
> > couldn't find the cause. I will add a warning about this to the wiki.
> > Your issue is different but I wanted to point this out here.
> >
>
> --
> Geomaster, Lda
> Avenida Barros e Soares, 423
> Nogueira
> 4715-214 Braga
> NIF 510906109
> Tel 253 680 223
> Tm 910 333 888
> Email jgr@geomaster.pt
> Site geomaster.pt
> GPS 41.53322,-8.41929
Reply to: