Re: Testing u-boot targets for buster!
Hello,
FYI I have installed u-boot 2019.01+dfsg-3 on my Dreamplug running
Buster, and all is now well.
U-Boot 2019.01+dfsg-3 (Mar 01 2019 - 04:42:31 +0000)
Marvell-DreamPlug
SoC: Kirkwood 88F6281_A1
DRAM: 512 MiB
Loading Environment from SPI Flash... SF: Detected mx25l1605d with page
size 256 Bytes, erase size 64 KiB, total 2 MiB
OK
In: serial
Out: serial
Err: serial
Net: egiga0, egiga1
88E1116 Initialized on egiga0
88E1116 Initialized on egiga1
IDE: ide_preinit failed
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... Device NOT ready
Request Sense returned 02 3A 00
1 Storage Device(s) found
2038528 bytes read in 115 ms (16.9 MiB/s)
9949 bytes read in 27 ms (359.4 KiB/s)
4015832 bytes read in 211 ms (18.2 MiB/s)
## Booting kernel from Legacy Image at 06000000 ...
Image Name: uImage-4.19.0-2-marvell
Created: 2019-02-26 14:27:36 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2038464 Bytes = 1.9 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 06600000 ...
Image Name: uInitrd-4.19.0-2-marvell
Created: 2019-02-26 14:28:44 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 4015768 Bytes = 3.8 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 06400000
Booting using the fdt blob at 0x6400000
Loading Kernel Image ... OK
Loading Ramdisk to 0fc2b000, end 0ffff698 ... OK
Loading Device Tree to 0fc25000, end 0fc2a6dc ... OK
Starting kernel ...
[ 0.011113] [Firmware Info]:
/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0:
local-mac-address is not set
[ 0.011214] [Firmware Info]:
/ocp@f1000000/ethernet-controller@76000/ethernet1-port@0:
local-mac-address is not set
[ 4.734090] sd 0:0:0:0: [sda] No Caching mode page found
[ 4.739468] sd 0:0:0:0: [sda] Assuming drive cache: write through
dproot: clean, 42790/241920 files, 317370/967168 blocks
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting hotplug events dispatcher: systemd-udevd.
[ ok ] Synthesizing the initial hotplug events (subsystems)...done.
[ ok ] Synthesizing the initial hotplug events (devices)...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[....] Checking file systems...fsck from util-linux 2.33.1
done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Starting Setting kernel variables: sysctl.
[ ok ] Configuring network interfaces...done.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting
/sbin/syslogd...
1146 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting
/sbin/klogd...
1174 (klogd)
. ok
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting system message bus: dbus.
[ ok ] Starting bluetooth: bluetoothd.
Starting Dropbear SSH server: dropbear.
[ ok ] Starting NTP server: ntpd.
Starting very small Busybox based DHCP server: Starting
/usr/sbin/udhcpd...
udhcpd.
Debian GNU/Linux buster/sid iron ttyS0
iron login:
Reply to: