On Mon, 20 Apr 2015 09:21:52 -0500 Robert Nelson <robertcnelson@gmail.com> wrote: > On Mon, Apr 20, 2015 at 9:10 AM, Robert Nelson > <robertcnelson@gmail.com> wrote: > > On Mon, Apr 20, 2015 at 7:49 AM, Neil Williams > > <codehelp@debian.org> wrote: > >> These instructions: https://wiki.debian.org/PandaBoard don't give a > >> bootable SD card for the panda-es: > >> > >> U-Boot SPL 2014.10+dfsg1-5 (Apr 07 2015 - 22:19:50) > >> OMAP4460 ES1.1 > >> SPL: Please implement spl_start_uboot() for your board > >> SPL: Direct Linux boot not active! > >> reading u-boot.img > >> spl_load_image_fat: error reading image u-boot.img, err - -1 > >> ### ERROR ### Please RESET the board ### > >> > >> There's no u-boot.img in the package. > >> > >> Is there specific support for panda-es or is there an issue in the > >> u-boot-omap package for panda/panda-es? > > > > and u-boot.img can be generated via: > > > > mkimage -A arm -T firmware -C none -O u-boot -a 0x80800000 -e 0 > > u-boot.bin u-boot.img > > This time, with a full cup of coffee... > > mkimage -A arm -T firmware -C none -O u-boot -a 0x80008000 -e > 0x80008000 -n "u-boot" -d ./u-boot.bin ./u-boot.img Image Name: u-boot Created: Mon Apr 20 16:01:59 2015 Image Type: ARM U-Boot Firmware (uncompressed) Data Size: 210468 Bytes = 205.54 kB = 0.20 MB Load Address: 80008000 Entry Point: 80008000 That gets me a little further, but then it hangs at: U-Boot SPL 2014.10+dfsg1-5 (Apr 07 2015 - 22:19:50) OMAP4460 ES1.1 SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img -- Neil Williams ============= http://www.linux.codehelp.co.uk/
Attachment:
pgpEOeUr95Qzo.pgp
Description: OpenPGP digital signature