Re: u-boot-omap fails to boot panda-es
On Mon, Apr 20, 2015 at 9:10 AM, Robert Nelson <robertcnelson@gmail.com> wrote:
> On Mon, Apr 20, 2015 at 7:49 AM, Neil Williams <codehelp@debian.org> wrote:
>> These instructions: https://wiki.debian.org/PandaBoard don't give a
>> bootable SD card for the panda-es:
>>
>> U-Boot SPL 2014.10+dfsg1-5 (Apr 07 2015 - 22:19:50)
>> OMAP4460 ES1.1
>> SPL: Please implement spl_start_uboot() for your board
>> SPL: Direct Linux boot not active!
>> reading u-boot.img
>> spl_load_image_fat: error reading image u-boot.img, err - -1
>> ### ERROR ### Please RESET the board ###
>>
>> There's no u-boot.img in the package.
>>
>> Is there specific support for panda-es or is there an issue in the
>> u-boot-omap package for panda/panda-es?
>
> and u-boot.img can be generated via:
>
> mkimage -A arm -T firmware -C none -O u-boot -a 0x80800000 -e 0
> u-boot.bin u-boot.img
This time, with a full cup of coffee...
mkimage -A arm -T firmware -C none -O u-boot -a 0x80008000 -e
0x80008000 -n "u-boot" -d ./u-boot.bin ./u-boot.img
Regards,
--
Robert Nelson
https://rcn-ee.com/
Reply to: