On 25/04/2014 12:08, James Valleroy wrote: > On Tue, Apr 22, 2014 at 1:17 PM, Robert Nelson <robertcnelson@gmail.com> wrote: >>>> >>>>> I need to review my full config delta against armmp, but let's start with >>>>> mmc: >>>> >>>>> CONFIG_TI_EDMA needs to be builtin. >>>> >>>> Why? I don't know anything about this setting, but I note you said "built >>>> in", and not "enabled", implying that it's a driver. Why should >>>> kernel+dtb+initramfs not allow this driver to be dynamically loaded for the >>>> hardware where it's needed? >>>> >>>> OTOH, maybe the problem is the poster is trying to boot without an >>>> initramfs... (no mention of an initramfs in the pastebin...) >>> >>> That wouldn't matter, from linux-image-3.13-1-armmp_3.13.10-1_armhf.deb >>> >>> # CONFIG_TI_EDMA is not set >>> >>> Sorry, can't confirm if it actually works as an external module. >> >> Correction, CONFIG_TI_EDMA can't be built as a module. > > Thanks for the information. I rebuilt the armmp kernel with > CONFIG_TI_EDMA=y, however it is still stuck at "Starting kernel ...". Is this not a default kernel consle issue ? I have the same unresolved issue with mirabox tries against armmp debian kernel. > I tried both with and without the initramfs. For the attempt with > initramfs, I used a uEnv.txt similar to [1]. The boot log is at [2]. > > [3] has the remaining config diffs between the BBB kernel and the > modified armmp that I recompiled. Would any of these be required to > boot on BBB? > > [1] https://github.com/beagleboard/image-builder/blob/master/target/boot/beagleboard.org.txt > [2] https://gist.github.com/jvalleroy/11284178 > [3] https://gist.github.com/jvalleroy/11284125 Regards,
Attachment:
0xF56ADD32.asc
Description: application/pgp-keys