New pogoplug install problems
Hi ,
The new pogoplugV2 arrived today, all black !
model number POGO-E02
Logged in locally as root and ran killall hbwd, and then moved it while still powered up on to the
network.
Followed the directions on http://projects.doozan.com/debian/, I used gparted on the laptop to
partition the new 8GB Sandisk Ultra flash drive.
Did :-
cd /tmp
wget http://projects.doozan.com/debian/kirkwood.debian-wheezy.sh
chmod +x
kirkwood.debian-wheezy.sh
export PATH=$PATH:/usr/sbin:/sbin
./kirkwood.debian-wheezy.sh
All went well, got past the bit asking if I want to keep the pogoplug capability..no
Then the install failed as it couldn't mount sda2 or sda1
df showed no /dev/sda anything
So I tried another flash drive and used fdisk locally, but it couldn't find /dev/sda
in /tmp ls showed that everything had downloaded and was in /tmp.
Next power cyclyed and started it up on the local network , which has no access to the outside
world.
logged in as root. OK
cd /tmp and ls showed the installer had gone , which is to be expected.
ran df
Pogoplug:/proc$ df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/mtdblock2 32768 12552 20216 38% /
none 128004 4 128000 0% /tmp
I've a flash stick in the front skt and the top on the back of it.
They are not shown :(
next step
mkdir /tmp/fred
Pogoplug:/tmp$ mount /dev/sda1 /tmp/fred
Pogoplug:/tmp$ df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/mtdblock2 32768 12552 20216 38% /
none 128004 4 128000 0% /tmp
/dev/sda1 2015824 3000 1910424 0% /tmp/fred
That is correct as the first partition was set at 2000MB
It looks as if plugging in a USB mem stick does not auto mount.
I noticed a directory in /tmp before I power cycled as debian, do I need to manually
mount /dev/sda1 as /tmp/debian
The othe install page I found was http://mehl.co/articles/installing_debian_on_the_pogoplug/
but wget failed to find meh1.co got invalid address.
Is there any difference between the pink and grey pogoplug and the Black and clear I have, they are
the same shape/
/proc/cpuinfo shows
Pogoplug:/tmp$ cat /proc/cpuinfo
Processor : ARM926EJ-S rev 1 (v5l)
BogoMIPS : 1192.75
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 16384
I assoc : 4
I line length : 32
I sets : 128
D size : 16384
D assoc : 4
D line length : 32
D sets : 128
Hardware : Feroceon-KW
Revision : 0000
Serial : 0000000000000000
Any suggestions appreciated ,
In the mean time I'll try
before running the kirkwood.......sh mounting /dev/sda1 as /tmp/debian
--
--
Best wishes / 73
Richard Bown
Email : richard@g8jvm.info
HTTP :http://www.g8jvm.info
nil carborundum a illegitemis
##################################################################################
Ham Call G8JVM . OS Fedora FC18 x86_64 on a Dell Inspiron N5030 laptop
Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs+mins )
QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 350W, 70cms 200W
Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W
##################################################################################
Please do not use the e-mail address of richard@g8jvm.com
Mail hosted by 1and1, Domain screwed up by 1and1 and Freeparking
Reply to: