Re: New pogoplug install problems
On Mon, 22 Apr 2013 15:22:57 +0100
Richard Bown <richard@g8jvm.info> wrote:
> Hi ,
> The new pogoplugV2 arrived today, all black !
> model number POGO-E02
> Logged in locally as root and ran killall hbwd, and then moved it while still powered up on to the
> network.
> Followed the directions on http://projects.doozan.com/debian/, I used gparted on the laptop to
> partition the new 8GB Sandisk Ultra flash drive.
> Did :-
> cd /tmp
> wget http://projects.doozan.com/debian/kirkwood.debian-wheezy.sh
> chmod +x
> kirkwood.debian-wheezy.sh
> export PATH=$PATH:/usr/sbin:/sbin
> ./kirkwood.debian-wheezy.sh
> All went well, got past the bit asking if I want to keep the pogoplug capability..no
> Then the install failed as it couldn't mount sda2 or sda1
>
> df showed no /dev/sda anything
> So I tried another flash drive and used fdisk locally, but it couldn't find /dev/sda
> in /tmp ls showed that everything had downloaded and was in /tmp.
> Next power cyclyed and started it up on the local network , which has no access to the outside
> world.
> logged in as root. OK
> cd /tmp and ls showed the installer had gone , which is to be expected.
> ran df
> Pogoplug:/proc$ df
> Filesystem 1k-blocks Used Available Use% Mounted on
> /dev/mtdblock2 32768 12552 20216 38% /
> none 128004 4 128000 0% /tmp
>
> I've a flash stick in the front skt and the top on the back of it.
> They are not shown :(
> next step
> mkdir /tmp/fred
> Pogoplug:/tmp$ mount /dev/sda1 /tmp/fred
> Pogoplug:/tmp$ df
> Filesystem 1k-blocks Used Available Use% Mounted on
> /dev/mtdblock2 32768 12552 20216 38% /
> none 128004 4 128000 0% /tmp
> /dev/sda1 2015824 3000 1910424 0% /tmp/fred
>
> That is correct as the first partition was set at 2000MB
> It looks as if plugging in a USB mem stick does not auto mount.
>
> I noticed a directory in /tmp before I power cycled as debian, do I need to manually
> mount /dev/sda1 as /tmp/debian
> The othe install page I found was http://mehl.co/articles/installing_debian_on_the_pogoplug/
> but wget failed to find meh1.co got invalid address.
> Is there any difference between the pink and grey pogoplug and the Black and clear I have, they
> are the same shape/
> /proc/cpuinfo shows
> Pogoplug:/tmp$
> cat /proc/cpuinfo Processor : ARM926EJ-S rev 1 (v5l)
> BogoMIPS : 1192.75
> Features : swp half thumb fastmult edsp
> CPU implementer : 0x56
> CPU architecture: 5TE
> CPU variant : 0x2
> CPU part : 0x131
> CPU revision : 1
> Cache type : write-back
> Cache clean : cp15 c7 ops
> Cache lockdown : format C
> Cache format : Harvard
> I size : 16384
> I assoc : 4
> I line length : 32
> I sets : 128
> D size : 16384
> D assoc : 4
> D line length : 32
> D sets : 128
>
> Hardware : Feroceon-KW
> Revision : 0000
> Serial : 0000000000000000
>
> Any suggestions appreciated ,
> In the mean time I'll try
> before running the kirkwood.......sh mounting /dev/sda1 as /tmp/debian
>
>
Just a bit more running the installer again without mount the mem stick manually
# Installing /usr/share/debootstrap/pkgdetails...
Connecting to download.doozan.com (50.116.34.13:80)
pkgdetails.md5 100% |********************************************************************************| 32 --:--:-- ETA
Connecting to download.doozan.com (50.116.34.13:80)
pkgdetails 100% |********************************************************************************| 559k 00:00:00 ETA
# Successfully installed /usr/share/debootstrap/pkgdetails.
# Starting debootstrap installation
E: unrecognized or invalid option --no-check-gpg
debootstrap failed.
See /tmp/debian/debootstrap/debootstrap.log for more information.
Pogoplug:/tmp$ less /tmp/debian/debootstrap/debootstrap.log
less: can't open '/tmp/debian/debootstrap/debootstrap.log': No such file or directory
Pogoplug:/tmp$ ls
debian install_uboot_mtd0.sh resolv.conf var
debootstrap kirkwood.debian-wheezy.sh uboot-mtd0-dump
Pogoplug:/tmp$ cd debootstrap/
Pogoplug:/tmp/debootstrap$ ls
control.tar.gz data.tar.gz debian-binary debootstrap.deb usr
Pogoplug:/tmp/debootstrap$ cd /tmp/debian
Pogoplug:/tmp/debian$ ls
lost+found
Strange ??
--
--
Best wishes / 73
Richard Bown
Email : richard@g8jvm.info
HTTP :http://www.g8jvm.info
nil carborundum a illegitemis
##################################################################################
Ham Call G8JVM . OS Fedora FC18 x86_64 on a Dell Inspiron N5030 laptop
Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs+mins )
QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 350W, 70cms 200W
Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W
##################################################################################
Please do not use the e-mail address of richard@g8jvm.com
Mail hosted by 1and1, Domain screwed up by 1and1 and Freeparking
Reply to: