[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: arm, both disk able to boot (raid1)



On 10/10/2012 12:26 PM, Björn Wetterbom wrote:
http://www.cyrius.com/debian/orion/qnap/ts-209/


Thx. Hmm ok so I need this hardware to connect the qnap to my laptop?
http://apple.clickandbuild.com/cnb/shop/ftdichip?productID=53&op=catalogue-product_info-null&prodCategoryID=47

On Wed, Oct 10, 2012 at 11:46 AM, rosea.grammostola
<rosea.grammostola@gmail.com <mailto:rosea.grammostola@gmail.com>> wrote:

    On 10/10/2012 11:07 AM, Björn Wetterbom wrote:

        I have a raid1 setup on my ts-209 (from the original install).
        See my
        fstab below.

        If your raid1 setup is done, just update your fstab and run
        "update-initramfs -u && flash-kernel" to update the initramfs
        with the
        new fstab and install the initramfs to flash. I'd advice you to
        have a
        serial console in case something goes wrong.


    Thanks. I've no experience with a serial console. Tutorials on the
    web seems to edit also the grub files, which aren't on this ARM install.
    What should be done different on a ARM in comparison with this
    method for instance?
    http://www.cyberciti.biz/faq/__howto-setup-serial-console-on-__debian-linux/
    <http://www.cyberciti.biz/faq/howto-setup-serial-console-on-debian-linux/>




        /B

        --- 8< ----

        $ cat /etc/fstab
        # /etc/fstab: static file system information.
        #
        # <file system> <mount point> <type> <options> <dump> <pass>
        proc            /proc           proc    defaults
           0       0
        /dev/md0        /               ext3    noatime,errors=remount-ro
        0       1
        /dev/md2        /home           ext3    noatime
        0       2
        /dev/md1        none            swap    sw
           0       0
        none            /proc/bus/usb   usbfs   defaults
           0       0

        --- >8 ---

        On Wed, Oct 10, 2012 at 10:53 AM, rosea.grammostola
        <rosea.grammostola@gmail.com
        <mailto:rosea.grammostola@gmail.com>
        <mailto:rosea.grammostola@__gmail.com
        <mailto:rosea.grammostola@gmail.com>>> wrote:

             On 10/10/2012 06:53 AM, Johnson Chetty wrote:


                      you need u-boot to set up the environment for the
                 device.... and
                      u-boot will then load the kernel..


             Thanks. Do you've pointers for how to do this?



             --
             To UNSUBSCRIBE, email to
        debian-arm-REQUEST@lists.__deb__ian.org <http://debian.org>
        <mailto:debian-arm-REQUEST@__lists.debian.org
        <mailto:debian-arm-REQUEST@lists.debian.org>>

             with a subject of "unsubscribe". Trouble? Contact
        listmaster@lists.debian.org <mailto:listmaster@lists.debian.org>
        <mailto:listmaster@lists.__debian.org
        <mailto:listmaster@lists.debian.org>>
             Archive:
        http://lists.debian.org/____50753797.7010803@gmail.com
        <http://lists.debian.org/__50753797.7010803@gmail.com>
        <http://lists.debian.org/__50753797.7010803@gmail.com
        <50753797.7010803@gmail.com">http://lists.debian.org/50753797.7010803@gmail.com>>






Reply to: